WinCC V6.2 Getting Started - DCE FEL ČVUT v Praze
WinCC V6.2 Getting Started - DCE FEL ČVUT v Praze
WinCC V6.2 Getting Started - DCE FEL ČVUT v Praze
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
07.03 Configuring the Alarm System<br />
Manual <strong>WinCC</strong> <strong>V6.2</strong> <strong>Getting</strong> <strong>Started</strong> 85<br />
6ZB5370-0CM02-0BA5<br />
In the dialog box "Tag Selection", select an existing tag or create a new one. For<br />
our project, we will create a new tag.<br />
In the left side of the tag selection dialog box, click on "Internal Tags" and then<br />
on the button to create a new internal tag.<br />
In the dialog box "Tag Properties", enter "AnalogAlarm" as the name of the<br />
new tag.<br />
In the dialog box "Tag Properties", select "Unsigned 16-Bit Value" as the data<br />
type.<br />
Confirm your entries by clicking on the button "OK".<br />
In the right side of the tag selection dialog box, click on "AnalogAlarm".<br />
Illustration 4.5.4: <strong>WinCC</strong> Project "Qckstart"; AnalogAlarm - Tag Selection<br />
Confirm your entries by clicking on the button "OK".<br />
Close the dialog box "Properties" by clicking on the button "OK".
Change language