Dosimetrist/Physicist Training Guide - UCSF Radiation Oncology

MOSAIQ Dosimetrist/Physicist Training Guide Module III
Notes Use the steps below to set up the patient per Option 2.
1. Add a prescription for the patient, documenting the dose delivered to date as 1
fraction with a Daily fractionation pattern. Add the remaining prescribed and
fractional doses in a second fractionation phase. Refer to Lesson 2 in Module I of
this guide for details.
2. Add treatment fields for the patient, the same as for new patients. Refer to
Lesson 3 in Module I of this guide for details. Refer to Appendix A in Module II
(import/export MLC files) and Lesson 5 in Module II (import/export RTP files)
of this guide for details.
3. Set up dose tracking for the patient, the same as for new patients. Refer to Lesson
6 in Module II of this guide for details.
4. Manually record dose delivered to date and add the start date and the correct
total MU per field. Refer to Lesson 7 in Module II of this guide for details.
5. Use the Treatment Chart/Calendar to schedule and treat remaining fractions.
Refer to Lesson 9 in Module III (schedule treatments) and Lesson 7 in Module II
(manually record treatments) of this guide for details.
The original radiation prescription should look similar to Figure 83. Figure 83 is
based on the patient information given in the example for this option.
Figure 83: Radiation Prescriptions Dialog Box with 1 Fraction for Dose
Delivered to Date
The appended radiation prescription should look similar to Figure 84. Figure 84
is based on the patient information given in the example for this option.
98 Copyright 2009, IMPAC Medical Systems
LTGRAD0005C/1.0/31-Mar-2009