Dosimetrist/Physicist Training Guide - UCSF Radiation Oncology
Dosimetrist/Physicist Training Guide - UCSF Radiation Oncology
Dosimetrist/Physicist Training Guide - UCSF Radiation Oncology
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Lesson 9: Treatment Calendar<br />
Copyright 2009, IMPAC Medical Systems 65<br />
LTGRAD0005C/1.0/31-Mar-2009<br />
Notes 6. Click .<br />
Schedules the fields, shown in Figure 66.<br />
Figure 66: Treatment Calendar with MFS Treatment Sessions<br />
MFS Beg appears in the Seq column to identify the start of the MFS session. MFS<br />
appears in the Seq column to identify the end of the MFS session.<br />
Scheduling a QA Mode Treatment Session<br />
QA Mode lets you run a quality check on a treatment field without a contribution to<br />
dose or fractions in the patient chart. QA mode recordings do not affect field<br />
fraction counts, field dose, dose site fractions, dose, or elapsed days. When you treat a<br />
QA mode treatment session from the Treatment Chart, a warning message tells you<br />
that QA mode treatments do not contribute to patient dose tracking. You can<br />
schedule QA mode sessions from the Treatment Calendar or the Treatment Chart. In<br />
this exercise, you will schedule a QA mode treatment session via the Treatment<br />
Calendar.<br />
You can now assign access rights to QA Mode distinct from<br />
Treatment Delivery security rights.<br />
1. In the Treatment Calendar, remove the treatment sessions, add treatment sessions<br />
for the Lung prescription, then schedule the fields for the prescription.<br />
Clears the Treatment Calendar of all treatment sessions, then adds the treatment<br />
sessions and schedules the fields to use in this exercise.<br />
2. Double-click a treatment session.<br />
Specifies the treatment session you want to schedule as a QA mode treatment<br />
session, then opens the Treatment Calendar Session dialog box.<br />
3. Right-click or press F4.