UC360 Administration and User Guide - Mitel Edocs
UC360 Administration and User Guide - Mitel Edocs
UC360 Administration and User Guide - Mitel Edocs
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SIP Settings<br />
Prerequisites<br />
<strong>UC360</strong> Configuration<br />
• Before configuring SIP settings, ensure that MCD programming is competed. See “MCD<br />
Programming Required (TBD)” on page 74.<br />
• Obtain the Server address name, <strong>User</strong> Name, <strong>and</strong> Login Name from the <strong>User</strong> <strong>and</strong> Device<br />
Configuration form.<br />
1. Press Settings<br />
2. Press Advanced<br />
3. Press System Settings<br />
4. Press SIP Settings<br />
See the information below for the parameters to configure. For a list of all the settings <strong>and</strong> their<br />
default options, see the <strong>UC360</strong> Engineering <strong>Guide</strong>lines.<br />
Account<br />
Under Account, set the following parameters:<br />
- Server Address — the IP address (IPv4) or the FQDN format address of the SIP<br />
server.<br />
- <strong>User</strong>name — the SIP user’s ID. It is the DN (extension number) assigned on the SIP<br />
server.<br />
- Display Name — the displayable caller name, e.g. John Brown.<br />
Authentication<br />
Under Authentication, set the login name <strong>and</strong> password.<br />
Transport<br />
Under Transport, enable or disable the following setting:<br />
- UDP — the <strong>UC360</strong> should be configured for UDP.<br />
- TCP/IP<br />
57