UC360 Administration and User Guide - Mitel Edocs
UC360 Administration and User Guide - Mitel Edocs
UC360 Administration and User Guide - Mitel Edocs
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>UC360</strong> <strong>Administration</strong> <strong>and</strong> <strong>User</strong> <strong>Guide</strong><br />
Camera Settings<br />
66<br />
1. Press Settings<br />
2. Press Advanced<br />
3. Press System Settings<br />
4. Press Camera Settings<br />
The Network camera has the following settings:<br />
• Enabled - Allows the ethernet camera to be enabled or disabled.<br />
• IP Address/Host Name<br />
- This is the IP address (IPv4) or host name of the ethernet camera. The IP address may<br />
have previously been manually programmed into the ethernet camera or the camera<br />
may have obtained the address from a DHCP server.<br />
- If a DNS server is being employed, then the ethernet camera can be addressed with<br />
the host name of the camera. The DNS server will perform the IP address lookup<br />
based on the host name.<br />
- If the camera is using DHCP, then use the camera manufacturer-provided utility to find<br />
the IP address.<br />
• <strong>User</strong>name - Sets the username for access to the ethernet camera.<br />
• Password - Sets the password for access to the ethernet camera<br />
• Brightness - Adjust the brightness of the ethernet camera<br />
See Ethernet Cameras in the <strong>UC360</strong> Engineering <strong>Guide</strong>lines for detailed information.