UC360 Administration and User Guide - Mitel Edocs
UC360 Administration and User Guide - Mitel Edocs
UC360 Administration and User Guide - Mitel Edocs
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Network Settings<br />
<strong>UC360</strong> Configuration<br />
If installing the <strong>UC360</strong> with a 3300/MCD, it may be easier to use static VLAN <strong>and</strong> QoS values<br />
by manually entering the information into the <strong>UC360</strong> Network Settings menu rather than<br />
obtaining parameters via DHCP or other methods.<br />
However, if you choose to have a DHCP server provide these values to the <strong>UC360</strong>, it should<br />
be noted that the 3300/MCD DHCP server may not support a field for defining L2 <strong>and</strong> L3 QoS<br />
values for Multimedia Conferencing. In this case, the L2 <strong>and</strong> L3 QoS values for Multimedia<br />
Conferencing will need to be statically programmed.<br />
See the <strong>UC360</strong> Engineering <strong>Guide</strong>lines for details on the various network settings.<br />
1. Press Settings<br />
2. Press Advanced<br />
3. Press System Settings<br />
4. Press Network Settings<br />
The following options are available as listed below.<br />
View Current<br />
All the items below are initially retrieved from the DHCP, except the MAC address. Some of<br />
these options may be overridden by the Static settings.<br />
Modify Static<br />
Modify these values based on your network requirements.<br />
802.x Protocol<br />
802.1X Settings can be set as required or left blank.<br />
Hardware<br />
No changes required.<br />
Tools <strong>and</strong> Features<br />
No changes required.<br />
59