UC360 Administration and User Guide - Mitel Edocs
UC360 Administration and User Guide - Mitel Edocs
UC360 Administration and User Guide - Mitel Edocs
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>UC360</strong> <strong>Administration</strong> <strong>and</strong> <strong>User</strong> <strong>Guide</strong><br />
58<br />
Media<br />
Under Media, set the following parameters:<br />
- Audio CODEC List — specify the preferred order for audio CODEC usage. Refer to<br />
the section on CODECs <strong>and</strong> b<strong>and</strong>width in the <strong>UC360</strong> Engineering <strong>Guide</strong>lines for more<br />
information.<br />
- Video CODEC List — specify the preferred order for video CODEC usage.<br />
- Packet Time — set the preferred packet time from 20 ms to 100 ms in 10 ms<br />
increments. A packet time of 20 ms is recommended. Note: Certain CODECS may<br />
only operate in 20 ms increments.<br />
- DTMF Mode — the <strong>UC360</strong> sends DTMF signaling both in-b<strong>and</strong> <strong>and</strong> out of b<strong>and</strong>.<br />
- DTMF Payload — set the In-B<strong>and</strong> payload number to a value between 96 <strong>and</strong> 127.<br />
101 is the default value. It is recommended to leave this at the default value. For third<br />
party SIP severs, consult the vendor’s documentation as to how to set the DTMF<br />
Payload value.<br />
Registration Time Out<br />
This is the SIP registration time out value in seconds. It is recommended to leave this at the<br />
factory default setting of 3600 seconds.<br />
Proxy Server Address<br />
This is the SIP Proxy server IP address (IPv4).<br />
Keep Alive Interval<br />
This is the SIP keep-alive interval in seconds. It is recommended to leave this at the factory<br />
default setting.