Sym HD 125/200 servicemanual - Scootergrisen
Sym HD 125/200 servicemanual - Scootergrisen
Sym HD 125/200 servicemanual - Scootergrisen
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Install R/L. crank case disassemble/install tool on<br />
the left crank case.<br />
Again turns on crank shaft puller on the crankshaft<br />
spiral tooth.<br />
Caution<br />
Crank shaft puller lock into on as far as possible<br />
the crank spiral tooth, prevented pulls the bad<br />
crank spiral tooth.<br />
Gradually tightens the crank shaft puller upper cap<br />
nut, drags into the crank to locate.<br />
Install 2 new dowel pin and new gasket.<br />
Install the right crankcase onto the left crankcase.<br />
Tighten 2 bolts on the crankcase.<br />
Torque value: 0.8~1.2kgf-m<br />
To this chapter contents<br />
11. CRANKCASE / CRANK<br />
Crank shaft<br />
puller<br />
Crank case disassemble/install tool<br />
2 bolts<br />
11-7
Change language