Sym HD 125/200 servicemanual - Scootergrisen
Sym HD 125/200 servicemanual - Scootergrisen
Sym HD 125/200 servicemanual - Scootergrisen
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
16. REAR WHEEL / REAR FORK / REAR CUSHION<br />
Operational Precaution<br />
General<br />
Please refer to the Maintenance Manual for tubeless tire in respect to the removal, repair and installation<br />
of the tires.<br />
Service data Unit: mm<br />
Item Standard Allowable Limit<br />
Run-out of rear rim<br />
Radial<br />
Axial<br />
-<br />
-<br />
2.0<br />
2.0<br />
Thickness of rear brake lining 5.1 2.0<br />
Sustaining stroke of rear cushion 72 -<br />
Torque Value<br />
Rear wheel shaft nut 10.0~12.0kgf-m<br />
Rear cushion upper bolt 3.5~4.5kgf-m<br />
Rear cushion under bolt 2.4~3.0kgf-m<br />
Rear fork mounting bolt 4.0~5.0kgf-m<br />
Exhaust muffler mounting nut 1.0~1.2kgf-m<br />
Exhaust muffler mounting bolt 3.2~3.8kgf-m<br />
Trouble Diagnosis<br />
Run-out of rear wheel<br />
Deformed or bent wheel hub.<br />
Improper tires.<br />
Loose wheel shaft.<br />
Soft Cushion<br />
The spring is too weak.<br />
Noisy Brake<br />
Worn brake lining.<br />
Offset brake disc.<br />
Improper assembly of brake caliper.<br />
Brake disc or wheel imbalance.<br />
16-2<br />
To this chapter contents<br />
Poor Performance of Brake<br />
Improperly adjusted brake.<br />
Contaminated brake disc.<br />
Worn brake lining.<br />
Air inside brake fluid pipe.<br />
Grease on brake disc.<br />
The brake fluid piping is clogged.<br />
The brake fluid pipe is deformed or bent.<br />
Insufficient amount of brake fluid in the<br />
reservoir.