Sym HD 125/200 servicemanual - Scootergrisen
Sym HD 125/200 servicemanual - Scootergrisen
Sym HD 125/200 servicemanual - Scootergrisen
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Remove the 2 cylinder head mounting bolts from<br />
cylinder head right side, and then remove 4 nuts<br />
and washers from cylinder head upper side.<br />
Remove the cylinder head.<br />
Remove 2 bolts of carburetor insulator and then<br />
take the insulator out.<br />
Remove cylinder head gasket and 2 dowel pins.<br />
Remove chain guide.<br />
Clean up residues from the matching surfaces of<br />
cylinder and cylinder head.<br />
Caution<br />
Do not damage the matching surfaces of<br />
cylinder and cylinder head.<br />
Avoid residues of gasket or foreign materials<br />
falling into crankcase as cleaning.<br />
To this chapter contents<br />
6. CYLINDER HEAD/VALVE<br />
2 Insulator bolts<br />
Chain guide<br />
4 Nuts<br />
Cylinder head mounting<br />
Carburetor insulator<br />
Dowel pin<br />
Gasket<br />
6-5
Change language