Ektron CMS400.NET Setup Manual

Step 7: Restore the Database
Installing Ektron CMS400.NET
Restore the database to the new destination folder. To do this,
follow these steps.
1. Right click the database you created in ”Step 6: Create a New
Database” on page 86.
2. Select All Tasks > Restore database.
3. In the Restore as database field, verify that the database you
created in Step 6 appears.
4. In the Restore section, click From device (circled above).
5. Click the Select Devices button (circled above).
6. The Choose Restore Devices screen appears. Click the Add
button (circled below).
Ektron CMS400.NET Setup Manual, Version 5.0 Revision 9 87