<strong>SGC</strong> Rapport 2013:277 9 Acknowledgements The authors acknowledge the support provided by the Swedish Energy Agency and the <strong>in</strong>dustrial partners coord<strong>in</strong>ated through the Swedish Gas Technology Centre. 64 Svenskt Gastekniskt Center AB, Malmö – www.sgc.se
<strong>SGC</strong> Rapport 2013:277 10 Literature 1. Elvers, B., Ullmann's Encyclopedia of Industrial Chemistry - 7th Edition <strong>in</strong> Pr<strong>in</strong>t / Sample Volume2011: Wiley-VCH Verlag GmbH. 2. Kopysc<strong>in</strong>ski, J., T.J. Schildhauer, and S.M.A. Biollaz, Production of synthetic natural gas (SNG) from coal and dry biomass – A technology review from 1950 to 2009. Fuel, 2010. 89(8): p. 1763-1783. 3. Lackner, M., Combustion Science and Technology, <strong>in</strong> Kirk-Othmer Encyclopedia of Chemical Technology2000, John Wiley & Sons, Inc. 4. van der Drift, A., et al., Compar<strong>in</strong>g the options to produce SNG from biomass, <strong>in</strong> 18th European Biomass Conference and Exhibition2010: Lyon, France. 5. Gassner, M. and F. Maréchal, Thermo-economic optimisation of the <strong>in</strong>tegration of electrolysis <strong>in</strong> synthetic natural gas production from wood. Energy, 2008. 33(2): p. 189-198. 6. Bengtsson, K., Tw<strong>in</strong>-Bed Gasification Concepts for Bio-SNG Production, <strong>in</strong> Chemical Eng<strong>in</strong>eer<strong>in</strong>g2007, Lund University: Lund. 7. From solid fuels to substitute natural gas (SNG) us<strong>in</strong>g TREMP, 2009, Haldor Topsoe: Kgs. Lyngby. p. 8. 8. Duret, A., C. Friedli, and F. Maréchal, Process design of Synthetic Natural Gas (SNG) production us<strong>in</strong>g wood <strong>gasification</strong>. Journal of Cleaner Production, 2005. 13(15): p. 1434-1446. 9. Kopysc<strong>in</strong>ski, J., T.J. Schildhauer, and S.M.A. Biollaz, Methanation <strong>in</strong> a fluidized bed reactor with high <strong>in</strong>itial CO partial pressure: Part I— Experimental <strong>in</strong>vestigation of hydrodynamics, mass transfer effects, and carbon deposition. Chemical Eng<strong>in</strong>eer<strong>in</strong>g Science, 2011. 66(5): p. 924-934. 10. Kopysc<strong>in</strong>ski, J., T.J. Schildhauer, and S.M.A. Biollaz, Methanation <strong>in</strong> a fluidized bed reactor with high <strong>in</strong>itial CO partial pressure: Part II— Model<strong>in</strong>g and sensitivity study. Chemical Eng<strong>in</strong>eer<strong>in</strong>g Science, 2011. 66(8): p. 1612- 1621. 11. Rüdisüli, M., et al., Monte Carlo simulation of the bubble size distribution <strong>in</strong> a fluidized bed with <strong>in</strong>trusive probes. International Journal of Multiphase Flow, 2012. 44(0): p. 1-14. 12. Standards, S.I.f., SS 15 54 38 Motorbränslen - Biogas som bränsle till snabbgående ottomotorer, 1999, SIS. 13. ISO, ISO 15403-1:2006 Natural gas -- Natural gas for use as a compressed fuel for vehicles -- Part 1: Designation of the quality, 2001. 14. SAE, Effect of Gas Composition on Octane Number of Natural Gas Fuels Society of Automotive Eng<strong>in</strong>eers, Inc., SAE 922359, 1992. 15. Biomass Technology Group. Available from: http://www.btgworld.com/technologies/<strong>gasification</strong>.html. 16. Boerrigter, H. and R. Rauch, Review of applications of gases from biomass <strong>gasification</strong>, 2006, Energy Research Centre of the Netherlands: Petten. p. 64. 17. <strong>SGC</strong> Förgasn<strong>in</strong>g av biobränslen - Möjligheter att framställa syntesgas och drivmedel från fasta biobränslen. 18. Olofsson, I., A. Nord<strong>in</strong>, and U. Söderl<strong>in</strong>d, Initial Review and Evaluation of Process Technologies Suitable for Cost-Efficient Medium-Scale Gasification for Biomass to Liquid Fuels, <strong>in</strong> ETPC Report 05-022002. Svenskt Gastekniskt Center AB, Malmö – www.sgc.se 65