2006 LSSV Owner's Manual Supplement (PDF) - GM Fleet

6. Turn the wheel wrench
with the wheel wrench
extender
counterclockwise to
loosen the wheel nuts.
Do not remove them
yet. You will now need
to jack the vehicle up.
8. Front Flat Tire: Attach the jack handle with the
hook end connected to the u-hook/clevis on
the jack. Slide the wheel wrench onto the jack
handle extension.
7. Assemble the jack and tools as follows:
9. Rear Flat Tire: Assemble the jack together with
the jack handle and the jack handle extensions.
Press the retention clip on the jack handle
extension (arrow) so it engages into the jack
handle. Slide the wheel wrench onto the jack
handle extension.
10. Turn the wheel wrench clockwise to raise the
jack head to the lifting point.
5-29