2006 LSSV Owner's Manual Supplement (PDF) - GM Fleet
2006 LSSV Owner's Manual Supplement (PDF) - GM Fleet
2006 LSSV Owner's Manual Supplement (PDF) - GM Fleet
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3. Press the MODE button to view the current value.<br />
4. Press the TIRE button to increase the value.<br />
5. Press the MODE button to decrease the value.<br />
6. Press the SET button to save when the desired<br />
value is reached.<br />
Repeat programming steps 2-6 until Cold Inflation<br />
Pressure levels are set for all axles as desired.<br />
7. Press the SET button to exit.<br />
8. Press the SET button again to revert to<br />
normal view.<br />
Low-Pressure Warning<br />
This function changes the<br />
low-pressure warning<br />
threshold for each axle.<br />
Factory default setting is 18<br />
PSI (1.24 Bar).<br />
See Capacities and Specifications on page 5-51 for<br />
Tire Pressure Monitoring System Setting Chart<br />
for setting value specifications.<br />
To Program<br />
1. Enter Level 1 Programming Mode, see Entering<br />
Programming Mode.<br />
2. To enter this function press the MODE button until<br />
the flat tire icon and pressure units are displayed.<br />
3. Press the TIRE button to<br />
scroll to the desired<br />
axle. The tires of the<br />
selected axle are filled<br />
in.<br />
4. Press the MODE button<br />
to view the current value.<br />
5. Press the TIRE button to increase the value.<br />
6. Press the MODE button to decrease the value.<br />
7. Press the SET button to save when the desired<br />
value is reached.<br />
5-40