2006 LSSV Owner's Manual Supplement (PDF) - GM Fleet
2006 LSSV Owner's Manual Supplement (PDF) - GM Fleet
2006 LSSV Owner's Manual Supplement (PDF) - GM Fleet
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
6. To disable this feature<br />
press the MODE button<br />
until the display reads<br />
OFF.<br />
7. Press the SET button to<br />
save and exit this mode<br />
when the desired value<br />
is reached.<br />
8. Press the SET again to revert to normal mode.<br />
Measurement Selection-Metric or Imperial<br />
Use this mode to select the combination of pressure<br />
and temperature units. Unit combinations are PSI -°F,<br />
Bar -°F, Bar -°C, PSI -°C.<br />
To Program<br />
1. Enter Level 1 Programming<br />
Mode, see Entering<br />
Programming Mode.<br />
2. To enter this function<br />
press the MODE button<br />
until the pressure and<br />
temperature units are<br />
displayed. (PSI/Bar, °C/°F).<br />
3. Press the TIRE button to enter.<br />
4. Use the TIRE or MODE button to scroll through the<br />
four combinations of unit settings.<br />
5. When the desired combination is displayed press<br />
the SET button to save and exit this mode.<br />
6. Press the SET button again to revert to normal<br />
mode.<br />
Tire Rotation Mode<br />
This function is used after tires are rotated and the new<br />
positions need to be updated. This procedure is valid for<br />
four tire locations only.<br />
To Program<br />
1. Enter Level 1 Programming<br />
Mode, see Entering<br />
Programming Mode.<br />
2. To enter this function<br />
press the MODE button<br />
until the tire rotation icon<br />
is displayed.<br />
5-43