Ph.D. - geht es zur Homepage der Informatik des Fachbereiches 3 ...

11.3. Simulation Model
Entering_Driver_Selection
Entering_Train_Length
Entering_Train_Maximum_Speed
Starting_Mission
The driver can choose between overriding the input of
further static train data or to enter all train data. In
the simulation, all data should be entered.
The static train length is entered as 500m
The static maximum velocity of the train is entered.
For the simulation, v max = 200 km h
is used, which will
be also referred to in further state machines.
The start of mission is activated.
11.3.2.1.2. Acknowledging_Level_Transition In the simulation, any transition from Application
Level 0 to Level 1 should be done via the override function in Figure 10.7 and not
by a valid MA. Accordingly, if the current Application Level is 0 (iLevel == 0), the override
function in the DMI should be activated first. This is modelled in Figure 11.11 with the
following states:
Figure 11.11.: UML state machine diagram of the “Acknowledging_Level_Transition” state
Setting_Override
Acknowledging_Transition
Activates the override function in the DMI.
Acknowledges the Level transition in the DMI.
225