03.02.2014 Views

Medianet Reference Guide - Cisco

Medianet Reference Guide - Cisco

Medianet Reference Guide - Cisco

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Chapter 6<br />

<strong>Medianet</strong> Management and Visibility Design Considerations<br />

<strong>Cisco</strong> Network Analysis Module<br />

This document discusses only the use of the <strong>Cisco</strong> Catalyst 6500 Series Network Analysis Module<br />

(WS-SVC-NAM-2). Specific testing was performed with a WS-SVC-NAM-2 with a WS-SUP32P-10GE<br />

supervisor within a <strong>Cisco</strong> Catalyst 6506-E chassis. Other platforms may have slightly different<br />

functionality. The WS-SVC-NAM-2 can analyze and monitor network traffic in the following ways:<br />

• The NAM can analyze chassis traffic via Remote Network Monitoring (RMON) support provided<br />

by the <strong>Cisco</strong> Catalyst 6500 Series supervisor engine.<br />

• The NAM can analyze traffic from local and remote NetFlow Data Export (NDE).<br />

• The NAM can analyze Ethernet LAN traffic via Switched Port Analyzer (SPAN), remote SPAN<br />

(RSPAN), or VLAN ACL (VACL); allowing the NAM to serve as an extension to the basic RMON<br />

support provided by the <strong>Cisco</strong> Catalyst 6500 Series supervisor engine.<br />

This document discusses only certain functionality of the NAM as it relates to gaining visibility into<br />

video flows within an enterprise medianet. A comprehensive discussion of the configuration and<br />

monitoring functionality of the NAM is outside the scope of this document. For the end-user and<br />

configuration guides for the <strong>Cisco</strong> Network Analysis Module Software, see the following URL:<br />

http://www.cisco.com/en/US/products/sw/cscowork/ps5401/tsd_products_support_series_home.html.<br />

NAM Analysis of Chassis Traffic<br />

The WS-SVC-NAM-2 has the ability to collect basic traffic statistics, per interface, from the supervisor<br />

line card within the <strong>Cisco</strong> Catalyst 6500 chassis. These statistics can be viewed as current rates or as<br />

cumulative data collected over time. Current rate data includes statistics such as the following:<br />

• Input and output percentage utilization of the interface<br />

• Input and output packets/second<br />

• Input and output bit or byte rates<br />

• Input and output non-unicast (multicast and broadcast) packets/second<br />

• Input and output discards/second<br />

• Input and output errors/second.<br />

Figure 6-5 shows an example of the monitoring output.<br />

OL-22201-01<br />

<strong>Medianet</strong> <strong>Reference</strong> <strong>Guide</strong><br />

6-13

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!