6100CR Refrigerated Sampler - Isco

6100CR Refrigerated Sampler
Section 2 Programming
4. While the 6100CR is taking a sample, during the purging
of the air and water lines, the display will show:
TAKING SAMPLE
PURGING LINES
5. While the sampler is filling the bottle, if you entered a
number greater than 1 for bottles/sample event, the display
will show:
TAKING SAMPLE 1
BOTTLE 1 OF X
6. While the sampler is filling the bottle, if you entered 1 for
the number of bottles/sample event, the display will
show:
TAKING SAMPLE 1
BOTTLE 1
7. Between samples, if you selected time pacing, the display
will show:
SAMPLE X AT HH:MM
HH:MM:SS DDMMMYY
8. Between samples, if you selected flow pacing, the display
will show: XX (the number of flow pulses) decreasing as the
sampler receives each flow pulse from the flow meter.
SAMPLE X
AFTER XX PULSES
When the sampler is done with its sampling routine, the
rack may not be in the home position.
9. If you want to remove the bottle rack, press Rack Reset to
move the rack to the home position so you can remove it.
10. If you are going to run another sampling program to fill
more bottles in the rack, press the Clear/Exit key to
return to the STANDBY display. The rack will stay where
it stopped for the last sample of the program you just ran.
When the sampler completes the routine you programmed,
the display will show:
DONE. . .XX SAMPLES (up to 24)
HH:MM:SS DDMMMYY
2-14