6100CR Refrigerated Sampler - Isco

More documents

Recommendations

Info

6100CR Refrigerated Sampler Section 3 Installation of the Sampler Figure 3-8 6100CR with Booster Pump Installed D E A B C Figure 3-9 Booster Pump Components 3-12
6100CR Refrigerated Sampler Section 3 Installation of the Sampler Components inside the booster pump enclosure: A - Pump motor B - Pump head (enclosing the Teflon gears) C - Liquid level detection switch (prevents “dry” operation of pump) D - Electronic control box (to interface the pump with the 6100CR Sampler) E - Pressure relief assembly The pump has no lift capability, so the sample line source must have enough pressure to deliver liquid to the pump inlet. Pump output is controlled by the pressure relief assembly to ensure performance and long pump life. Power for the pump is supplied from a separate 120 VAC grounded outlet. The booster pump is shipped with instructions for its installation on the 6100CR. Booster Pump Specifications: Supply Power Control Power Minimum Input Pressure Maximum Input Pressure 120 VAC 60 Hz 1.48 A 12 VDC (from sampler) 1 PSIG 20 PSIG Maximum Ambient Temp. 120°F Minimum Ambient Temp. 32°F 3-13
Page 1:
6100CR Refrigerated Sampler Install
Page 5 and 6:
6100CR Refrigerated Sampler Site Re
Page 7 and 8: 6100CR Refrigerated Sampler Table o
Page 9 and 10: 6100CR Refrigerated Sampler Table o
Page 11 and 12: 6100CR Refrigerated Sampler Section
Page 57: 6100CR Refrigerated Sampler Section
Page 71 and 72: 6100CR Refrigerated Sampler Appendi
Page 73 and 74: 6100CR Refrigerated Sampler Replace
Page 75 and 76: 6100CR Refrigerated Sampler Replace
Page 87: Compliance Statements Teledyne Isco
show all

6100CR Refrigerated Sampler - Isco

Create successful ePaper yourself

Delete template?

Save as template?