POLITECHNIKA WARSZAWSKA

A1. Description of the simulation program
A1.2.2.2.
Description of the configuration file root.cfg.
File root.cfg (see Section A1.2.1) includes:
h # comments line;
h names of data files, as: graphic file (graph.dat), induction motor parameters
file (mot.dat), numerical file (rootnum.dat), control file (rootctrl.dat), integer file
(rootint.dat);
h initial name of the file (here for example root) in which (if required by user)
simulation results are stored (program automatically extents the name with three
digits of simulation number: 001, 002, etc.);
h names of graphics windows;
h variables which should by stored in file during simulation;
h number of windows for graphic pages.
For example command: screen 2 2 1 2,
means that there are 2x2 diagrams versus time in graphic window
No 1 (time), and 1x2 function diagram in graphic window No 2;
h axes definitions for diagrams. On the one diagram several function can be
shown, but in the same scale.
For example line: time me 1 3 red,
means that diagram 3 in graphic window No 1 present the torque me versus time,
with red colour.
h scales definition for each axes. For the first graphic page, which present
diagrams versus time, only Y scale is required. For the second page scaling for X
and Y axes should be defined.
A1.2.3.
Data files
A1.2.3.1.
Listing data files
h File graph.dat with graphic parameters :
182