POLITECHNIKA WARSZAWSKA

A1. Description of the simulation program
As example of integer variables used in the program are:
• switch states of inverter - d1, d2, d3;
• number of applied inverter voltage vector - vec;
• number of inverter switchings - nrs;
A1.4.
Menu options
The program can change and store selected parameters. In each moment of
execution the program can be stopped (by appropriate button) and arbitrary graphics
and/or simulation parameters can be changed. Also, the results can be observed.
Additionally, each variable or parameter can be seen in edition window. It is possible
to write and read new and old configuration files as well as data files with name given
by user.
Examples of Menu options:
• P (or M-P) - activation of parameter window. To change arbitrary parameter,
write the name of the parameter, push Enter and write the new
value.
• F (or M-F) - activation of parameter and configuration window sub-menu:
G - write current graphics parameters to file with user defined name;
M - write current induction motor parameters to file with user defined
name;
N - write current numerical parameters to file with user defined
name;
T - write current control parameters to file with user defined name;
I - write current integer parameters to file with user defined name;
C - write all current parameters to files with user defined names. This
option is equivalent to all above and S option;
D - write all current parameters to files with extension dft.
Configuration data are written to the file default.cfg;
S - actualization of configuration parameters in configuration file to
current values;
188