08.03.2014 Views

Laboratory Product Catalogue Total Laboratory Science Support

Laboratory Product Catalogue Total Laboratory Science Support

Laboratory Product Catalogue Total Laboratory Science Support

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Centrisart ® Centrifugal Units for Rapid Sample Preparation<br />

Ultrafiltration and Cell Harvesting Filtration<br />

Ultrafiltrate<br />

Ultrafilter<br />

Sample<br />

Centrifugal<br />

force<br />

Direction of<br />

ultrafiltration<br />

Particles etc.<br />

Centrisart ® I for preparation of<br />

protein-free ultrafiltrates.<br />

Ready-to-use units for protein binding<br />

studies and for removal of proteins from<br />

biological samples, e.g. for determination<br />

of creatinine in human serum.<br />

Centrisart I consists of a sample tube and<br />

a free-sliding inner tube with an ultrafilter<br />

bottom. The principle of construction<br />

turns the traditional method upside down:<br />

ultrafiltration takes place opposite to the<br />

direction of the centrifugal force.<br />

This prevents blocking of the ultrafilter and<br />

even allows filtration of particle-containing<br />

samples. The ultrafiltrate is collected in the<br />

inner tube and can be easily removed.<br />

Specifications for Centrisart I<br />

Dimensions<br />

Of the Centrifugal tube, max. outer diameter, 14 mm.<br />

93 mm long. Can be used in each laboratory centrifuge for 14 mm<br />

or 17 mm+100 mm tubes.<br />

Filtration area 0.79 cm 2<br />

Materials<br />

Max. centrifugal force<br />

Polystyrene centrifugal tubes. Cellulose proprionate inner tube.<br />

Cellulose triacetate or polysulfone ultrafilter. Polyethylene cap.<br />

2,500+g (swing bucket rotor) and<br />

2,000+g (fixed angle rotor)<br />

Sample volume Max. 2.5 ml. Min. final volume, 100 µl<br />

Ultrafiltration rate<br />

Depends on the protein content of the sample, the temperature,<br />

and on the ultrafilter cut-off used. In general, 2.5 ml sample volumes<br />

can be ultrafiltered in 30 to 90 minutes.<br />

Order numbers for Centrisart I<br />

13209 E Trial pack, with 3 each units of 5,000, 10,000, 20,000 and<br />

100,000 MWCO<br />

13229 E With 5,000 MWCO cellulose triacetate ultrafilter, pack of 12<br />

13239 E With 10,000 MWCO cellulose triacetate ultrafilter, pack of 12<br />

13249 E With 20,000 MWCO cellulose triacetate ultrafilter, pack of 12<br />

13269 E With 100,000 MWCO polyethersulfone ultrafilter, pack of 12<br />

13279 E With 300,000 MWCO polyethersulfone ultrafilter, pack of 12<br />

106

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!