Laboratory Product Catalogue Total Laboratory Science Support

Sterile Filtration of Gases Filtration
Specifications for Sartofluor MidiCaps
Connectors
Hose nipple 10 mm or 1”–11” Sanitary flange
Biosafety
All materials pass the USP Plastics Test Class VI.
Bubble point
Min. value with 60% Isopropanol:
1.5 bar (150 kPa, 21.75 psi) for 0.1 µm pore size
1.0 bar (100 kPa, 14.5 psi) for 0.2 µm pore size
0.6 bar (60 kPa, 8.7 psi) for 0.45 µm pore size
Chemical compatibility See page 124
Air flow rate For 0.2 µm capsules see diagram on page 93
Filter area 0.015 m 2 , 0.03 m 2 , 0.05 m 2 , 0.1 m 2 or 0.2 m 2
Material
PTFE membrane filter. Housing, polypropylene supporting
and drainage layers
Max. differential pressure 4 bar (58 psi) at 20°C, 2 bar at 80°C
Max. operating pressure 4 bar (58 psi) at 20°C
Sterilization
By autoclaving (121°C or 134°C)
Water penetration pressure Approx. 4.5 bar (450 kPa, 65.3 psi) for 0.2 µm pore size
Order numbers for Sartofluor MidiCaps
Sartofluor MidiCaps with hose nipple inlet and outlet
5185358T7-XX-B 0.1 µm, 0.05 m 2 , pack of 5
5185358T8-XX-B 0.1 µm, 0.1 m 2 , pack of 5
5185358T9-XX-A 0.1 µm, 0.2 m 2 , pack of 4
5185307T7-XX-B 0.2 µm, 0.05 m 2 , pack of 5
5185307T8-XX-B 0.2 µm, 0.1 m 2 , pack of 5
5185307T9-XX-A 0.2 µm, 0.2 m 2 , pack of 4
5185306T9-XX-A 0.45 µm, 0.2 m 2 , pack of 4
XX: Connector styles
Available Connectors
SS, SO, OO, FF, FO, HH (only for size 7)
S
11” Tri-Clamp (Sanitary)
O
F
H
Single stepped hose barb
3” Tri-Clamp (Sanitary)
Small, multiple stepped hose barb
(with filling bell at the outlet)
94