Laboratory Product Catalogue Total Laboratory Science Support

Accessories for remote control function
Users of the MD8 airscan now have the
possibility of operating this air sampler
from a distance, using either of two remote
control configurations:
a) Via a PC (with Microsoft 95/98 or higher)
with MD8 airscan dialog system and cable
connection to the MD8 airscan (1ZE---0004).
b) Via a PLC interface unit (1ZE---0003).
Gelatine membrane filter, 80 mm, sterile,
pack of 50 for use with stack
Gelatine membrane filters are still available as
80 mm filter discs, suitable for the filter holder
supplied with the MD8 airscan. The filters
are sterile-supplied, but the filter holders
have to be sterilized by dry heat (180°C, 2h)
and then equipped with the filters under
sterile conditions. For performing routine
check-ups, a stack is recommended in this
case.
Further consumables for air monitoring
If gelatine filters cannot be used (high
humidity, high temperature), it is recommended
to use cellulose nitrate filters.
Accessories for the MD8 air samplers
Order numbers
16756 Calibration unit for the MD8 air
samplers
17208 Case for MD8 airscan
17656 Aluminium stack for MD8 air
samplers
Tubing and connectors set
Order numbers
17085 Flexible PVC hose with reinforced ends (2 m)
17088 Flexible PVC hose with reinforced ends (5 m)
17662 Silicone tubing, sterilizable (1 m, state length required)
17657 Set of connectors (consisting of 17658 and 17659), aluminium
17658 Connector (air sampler inlet to flexible hose), aluminium
17659 Connector (flexible hose to filter holder|adapter), aluminium
Accessories for isolator application
Order numbers
17016 Adapter (DN 25 hose barb to 1"–1 1/2" sanitary flange) to
connect MD8 airscan to an isolator via silicone tubing and a
filter capsule, stainless steel
17030 Adapter (DN 30 hose barb to 1"–1 1/2" sanitary flange) to
connect MD8 airscan to an isolator via flexible PVC hose and
filter capsule, stainless steel
17033 Clamp for 1"–1 1/2" sanitary flanges, stainless steel
17659---001 Connector (flexible hose to filter holder|adapter),
hose nipple, stainless steel
17659---003 Connector (flexible hose to filter holder|adapter), tri clamp,
stainless steel
17801---001 Adapter for gelatine filter disposables, stainless steel
5181307T9-----SS Sartofluor Capsule with PTFE membrane and sanitary flange
inlet and outlet, for sterile air filtration inserted between the
MD8 airscan and isolator
Accessories for remote control function
Air Monitoring | Accessories Microbiological
Analysis
Replacement parts for the stack
Order numbers
17655 Individual filter holders
for gelatine filter type
12602--80----ALK
17660 Middle part
17661 End cap
Order numbers
1ZE---0003
1ZE---0004
Remote control (Interface) for MD8 airscan designed
for PLC units
Remote control for MD8 airscan for use with PC
(dialog system software)
Consumables used with stack
Gelatine disc filters, 3 µm pore size, 80 mm, 50 pieces/pack
Order numbers
12602-080 ALK Gelatine disc filter, sterile, sealed in units of five each in a
polyethylene bag
Further consumables for air monitoring
Cellulose nitrate membrane filters, 80 mm diameter, 100 pieces/pack
Order numbers
11404--80----ALN
13004--80----ALN
11301--80----ALN
Cellulose nitrate membrane filters, 0.8 µm, white with black
grid, presterilized in bags of 5
Cellulose nitrate membrane filters, 0.8 µm, gray with white
grid, presterilized in bags of 5
Cellulose nitrate membrane filters, 8 µm, white no grid,
presterilized in bags of 5
143