Laboratory Product Catalogue Total Laboratory Science Support

Specifications
Stainless steel multi-branch manifolds and individual filter holders
Stainless steel quality
High-grade stainless steel:
B.S. 304S31|AISI 304
Dimensions
3-branch manifold:
in mm (W|H|D) 3+100 ml: 432|184|120
3+500 ml: 442|262|132
6-branch manifold:
6+100 ml: 906|268|120
6+500 ml: 916|329|132
Max. operating pressure
Vacuum or max. 2 bar pressure (29 psi)
Sterilization
By autoclaving (max. 134°C),
By dry heat (max. 180°C),
By flaming,
By other methods acc. to ISO 8199
Parts and materials
Lid, funnel, base part, – filter support, clamp and tap made
of stainless steel. Silicone flat gasket. Silicone lid seal
Flow rate per filter station 200 ml/min with 0.2 µm membrane filter
for water at 90% vacuum 600 ml/min with 0.45 µm membrane filter
Filtration area 12.5 cm 2
Suitable membrane
50 mm (47 mm, if using a 47 mm frit
filter diameter filter support 6980103)
Outlet spouts
10 mm outside diameter
(individual system)
Outlet (branches only) Hose nipple, DN 10
Colony Count | Traditional Filter Holders Microbiological
Analysis
171