Laboratory Product Catalogue Total Laboratory Science Support

Sartocon ® Slice 200. The Low Hold-Up Volume
Crossflow Cassette Filter for Low Volume Applications
Ultrafiltration and Cell Harvesting Filtration
Sartocon Slice 200
Sartocon Slice 200 Crossflow filters are
designed for low volume applications.
Target use
– product discovery
– pre-clinical trials
– small-scale clinical trials
– membrane screening
The cassettes are available with Polyethersulfone
and Hydrosart membrane types in
both MF and UF formats.
The Polyethersulfone membrane
The robust polyethersulfone membrane
(PESU) is a polymer –which is stable within
a broad pH (1–14) and temperature range –
that is well established and widely accepted
in the biotechnological and pharmaceutical
industries. Membrane regeneration and
depyrogenation is accomplished by using
(1N) NaOH at elevated temperatures as
required. Cassettes are stored in 0.1N NaOH.
The Hydrosart ® membrane
Hydrosart is a stabilized cellulose-based
membrane that has been optimized for use
in the biotechnological and pharmaceutical
industries. The Hydrosart membrane is a stable
polymer (created by a Sartorius patented
process) which is compatible with a wide
range of chemical agents and stable within
a broad pH range. It is also an extremely
hydrophilic and neutral membrane, making
it non-protein binding and virtually nonfouling.
It exhibits extremely high and
consistent flux rates. Membrane regeneration,
and depyrogenation is accomplished by using
(1N) NaOH at elevated temperatures as
required. Cassettes are stored in 0.1N NaOH.
Product profile
Hydrosart cassettes exhibit no adsorption of
proteins, viruses, etc. Membrane retention is
unaffected by repeated use. The Hydrosart
ultrafiltration cassette can be re-used without
any loss of integrity or performance.
“Out-of-the-box” performance is maintained
with multiple uses. These features make the
PESU and Hydrosart membrane ideally suited
to the biotechnological industry.
Feature
Benefits
Low hold-up volume Minimized working
volume.
Low protein-binding High product yield;
Easily cleaned.
Wide pH and a wide Chemicals can be
variety of temperature used for the removal
range
of foulants.
High flow rates Economical filtration
runs.
Silicone sealing No glues etc.
compound
Self Sealing.
Identical flow geome- Straight line,
try and hydraulic scale-up.
dimensions as larger
scale-up devices.
Ordering information
Available Slice 200 types and order numbers
Cut off | Pore size Hydrosart Polyethersulfone
200 cm 2 filter area 200 cm 2 filter area
1 kD 3081460902E--SG
2 kD 3081441902E--SG
5 kD 3081442902E—SG 3081462902E--SG
8 kD 3081463402E--SG
10 kD 3081443902E--SG 3081463902E--SG
30 kD 3081445902E--SG 3081465902E--SG
50 kD 3081465002E--SG
100 kD 3081446802E--SG 3081466802E--SG
300 kD 3081467902E--SG
0.1 µm 3081545802W--SG
0.2 µm 3081860702W--SG
0.45 µm 3081860602W--SG
114