Laboratory Product Catalogue Total Laboratory Science Support

More documents

Recommendations

Info

$H:\Tira_Derritron Brochures\Der$

arium ® RO 61316 – Reverse Osmosis System Description The compact arium ® RO 61316 laboratory water purification system is designed to produce RO-Water for general laboratory applications. Applications – Feed water for ultrapure water systems – Rinsing glassware and laboratory vessels – Feed water for humidifiers, autoclaves and dish washer arium ® RO 61316 Laboratory Water Systems With production volumes up to 16 l/h and up to 99% rejection rate of ions, bacteria, organics and viruses, automated RO-membrane back-flushing, and a constant flow rate, the arium ® 61316 is the ideal choice for daily laboratory applications. The efficient RO-membranes reduce water wastage and provide excellent product water quality, whilst ensuring high retention rates of the water impurities. By the use of an optional closed pressurized tank (30, 70, 100 liter) the RO product water will be distributed with up to 3.5 bar to the point of use. This unique feature provides a pressurized product-water flow for all your lab applications. There is no need for an additional distribution pump. Specifications Features – Four line alphanumerical display – Simple menu navigation – Displaying conductivity, rejection rate, tank-level, temperature etc. – Typical conductivity < 20 µS + cm – Production capacity up to 380 liter per day – Easy to change pre-treatment cartridge and RO-modules – Automatic RO-membrane-back-flush with RO-permeat – Constant flow rate – Several alarm functions – Product water storage in open gravity or closed pressurized tank – Serial interface RS-232 – PLC interface for external communication Unit dimensions Width 43 cm (16.85”) Height 48 cm (19”) Depth 33.4 cm (13.15”) System weight 15 kg (33 lbs) Operation weight 22 kg (49 lbs) Electrical power requirements 100-240 V AC 50-60 Hz single phase Inlet feed water requirements Potable tap water feed only (feed water to meet drinking water standards of the U.S., European Union or Japan) Minimum inlet pressure 1 bar|15 psi Maximum inlet pressure 6.8 bar|100 psi Temperature 5°C–30°C (41°F–86°F) Hardness (max CaCO 3 ) 360 ppm or softened water Silt density index < 3 Free chlorine 0.1 ppm Turbidity < 1 NTU Iron (total as Fe) < 0.1 ppm Ambient temperature & humidity Operation Storage 5°C–30°C (41°F–86°F) 80% relative humidity 5°C-45°C (41°F–113°F) 80% relative humidity 194
RO system schematic Inlet Pressure regulator Conductivity cell Pump Conductivity analysis|Rejection Conductivity cell Display Solenoid valve Pretreatment cartridge RO module #1 RO module #2 RO pressure tank Drain Product water quality Rejection rates Monovalent ions Up to 98% Polyvalent ions Up to 99% Particles > 99% Microorganisms > 99% Dissolved organics (>300 MW) > 99% Product flow rate [l/h]* 16 (± 20% at 25°C) Maximum recovery rate* Approx. 55% * Depends on feed water quality and temperature arium ® RO 61316 Laboratory Water Systems Ordering information 61316 arium ® RO system 613CPF05-------V 613CPM2-------V 611CDS2 61316CDS2 613AMDG1 613APV31 613APV70 613APV100 61316030F05M1A 61316070F05M1A 61316100F05M1A ** at 2.5 bar inlet pressure 2+ pretreatment cartridges 2+ RO modules Sanitization kit for the tank (2 syringes) Sanitization kit for the RO modules (2 syringes) Dispense gun for tank 30-liter tank** 70-liter tank** 100-liter tank** Complete Reverse Osmosis System with a tank capacity of 30 litres** (includes arium ® 61316, tank, 2+ RO modules, 2 pretreatment cartridges + sanitizing syringes for RO modules & tank). Complete Reverse Osmosis System with a tank capacity of 70 litres** (includes arium ® 61316, tank, 2+ RO modules, 2 pretreatment cartridges + sanitizing syringes for RO modules & tank). Complete Reverse Osmosis System with a tank capacity of 100 litres** (includes arium ® 61316, tank, 2+ RO modules, 2 pretreatment cartridges + sanitizing syringes for RO modules & tank). 195
Page 1:
Laboratory Product Catalogue Total
Page 5 and 6:
About Sartorius Sartorius AG is an
Page 7 and 8:
Filtration Applications Major Filtr
Page 9 and 10:
Concentration of Proteins The Sarto
Page 11 and 12:
Comparison of the adsorption of var
Page 13 and 14:
Other water testings 142 mm diamete
Page 15 and 16:
Filtration Filtration Membrane Filt
Page 17 and 18:
Order numbers for cellulose acetate
Page 19 and 20:
Polyethersulfone Membrane Filters,
Page 21 and 22:
Order numbers for cellulose nitrate
Page 23 and 24:
Hydrophobic PTFE Membrane Filters,
Page 25 and 26:
Polycarbonate Track-Etch-Membrane F
Page 27 and 28:
Ultrafiltration Membrane Filters fr
Page 29 and 30:
Minisart ® 0.2 µm Syringe Filter
Page 31 and 32:
Specifications for Minisarts, Minis
Page 33 and 34:
Minisart-NY25 (Nylon) Versatile fil
Page 35 and 36:
Order numbers for Minisart SRP4 178
Page 37 and 38:
Polycarbonate holder for aqueous so
Page 39 and 40:
Polycarbonate holder for aqueous so
Page 41 and 42:
Accessories for Ready-to-Use Minisa
Page 43 and 44:
25 mm Glass Holder for the Filtrati
Page 45 and 46:
All-glass Holder for Particle Remov
Page 47 and 48:
Order numbers for 47 mm polycarbona
Page 49 and 50:
Water jet pump with G3/4 female thr
Page 51 and 52:
Sartolab ® P20 and Sartolab ® P20
Page 53 and 54:
SartoScale Filter Test Disposables
Page 55 and 56:
Sartobran ® P 150 and Sartobran ®
Page 57 and 58:
Type 00, with hose nipple inlet and
Page 59 and 60:
Order numbers for Sartopore 150 Wit
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Mini Filter Cartridges for the Part
Page 69 and 70:
Sartoclear ® P Depth Filter Capsul
Page 71 and 72:
Low-Cost Polycarbonate Holder for t
Page 73 and 74:
47 mm Stainless Steel Filter Holder
Page 75 and 76:
142 mm in-line PTFE holder This fil
Page 77 and 78:
Stainless Steel Holder with 2 Liter
Page 79 and 80:
GMP-complying 142 mm Stainless Stee
Page 81 and 82:
Modular Assembly System for Stainle
Page 83 and 84:
Filtration Systems with Pressure Ta
Page 85 and 86:
Order numbers 17530 5 liter capacit
Page 87 and 88:
With commercially available hoses T
Page 89 and 90:
Order numbers for PTFE pressure hos
Page 91 and 92:
Order numbers for Midisart 2000 uni
Page 93 and 94:
Sartofluor ® MidiCaps with PTFE Me
Page 95 and 96:
Hydrophobic PTFE Membranes, Type 11
Page 97 and 98:
25 mm Stainless Steel Filter Holder
Page 99 and 100:
Sartofluor ® Mini Cartridges for H
Page 101 and 102:
Housings for Sterile Air Venting an
Page 103 and 104:
Ordering information Vivaspin 2, 0.
Page 105 and 106:
Ordering information Vivaspin 15, 2
Page 107 and 108:
Vivapore Solvent Absorption Concent
Page 109 and 110:
Ordering information Vivacell 70, 1
Page 111 and 112:
Sartocon ® Slice The Pilot-Scale C
Page 113 and 114:
Specifications Drive Motor 24 V DC
Page 115 and 116:
Sartocon ® Slice 200 Stainless Ste
Page 117 and 118:
Filter Papers Introduction Generall
Page 119 and 120:
Chemical Compatibility 1. Filter Ma
Page 121 and 122:
2. Filter Holder, Cartridge Housing
Page 123 and 124:
3. Ready-to-Connect Filtration Unit
Page 125 and 126:
Membrane Chromatography Membrane Ch
Page 127 and 128:
Vivapure AdenePACK 100 Vivawell Met
Page 129 and 130:
Sartobind ® The Pace Maker in Memb
Page 131 and 132:
Technical data Sartobind MA ion exc
Page 133 and 134:
Product and ordering information Sa
Page 135 and 136:
Sartobind ® System For a complete
Page 137 and 138:
Microbiological Analysis Air Monito
Page 139 and 140:
AirPort MD8 Battery-Powered Portabl
Page 141 and 142:
Specifications of gelatine filters
Page 143 and 144: Accessories for remote control func
Page 145 and 146: The membrane filters All membranes
Page 147 and 148: Microsart e.motion Membrane Filters
Page 149 and 150: White membrane with black grid, for
Page 151 and 152: White membrane with black grid, for
Page 153 and 154: Specifications Design Growth Promot
Page 155 and 156: Cellulose nitrate membrane filters,
Page 157 and 158: Order numbers for nutrient pad sets
Page 159 and 160: Order numbers for nutrient pad sets
Page 161 and 162: Lactose broth media, bottled concen
Page 163 and 164: Biosart ® 100 Monitors, 100 ml, 47
Page 165 and 166: Biosart ® 250 Funnels In microbiol
Page 167 and 168: Specifications Stainless steel qual
Page 169 and 170: Accessories and replacement parts f
Page 171 and 172: Specifications Stainless steel mult
Page 173 and 174: Individual stainless steel filter h
Page 175 and 176: Water traps Used between suction fl
Page 177 and 178: Order numbers traditional pumps Des
Page 179 and 180: Stainless steel tweezers Membrane f
Page 181 and 182: Contents Parts supplied Aluminium c
Page 183 and 184: Order no. for universal pump Descri
Page 185 and 186: Additional accessories for reusable
Page 187 and 188: Bags for Fluid Handling Sterile Flu
Page 189 and 190: Sterile Fluid Handling Bags: 5 Lite
Page 191 and 192: Laboratory Water Systems arium ® W
Page 193: Ambient temperature & humidity Oper
Page 197 and 198: Flow chart 5 µm Prefilter Outlet P
Page 199 and 200: Ambient temperature and humidity Op
Page 201 and 202: Sartorius TOC Instrument - Electron
Page 203 and 204: arium ® Pressure Tanks - Product W
Page 205 and 206: arium ® 613CPM2--------V - Reverse
Page 207 and 208: Cartridge kit for 611DI and 611UF s
Page 209 and 210: Cell Cultivation Systems Benchtop S
Page 211 and 212: CERTOMAT ® Incubation Shakers CERT
Page 213 and 214: Reference BBI-885 3134 BBI-885 3142
Page 215 and 216: Specifications Microbiological grad
Page 217 and 218: SuperSpinner - Disposable Membrane
Page 219 and 220: Ordering information Description BI
Page 221 and 222: Homogenizers and Centrifuges Mikro-
Page 223 and 224: Accessories for homogenizers Mikro-
Page 225 and 226: Filter Integrity Testing Systems Sa
Page 227 and 228: Specifications for Sartocheck Junio
Page 229 and 230: Technical specification Power requi
Page 231 and 232: Technical specifications Power requ
Page 233 and 234: Laboratory Equipment for Electroche
Page 235 and 236: Specifications pH Measurement Docu-
Page 237 and 238: Specifications pH measurement PP-15
Page 239 and 240: Sensors for the Highest Quality Mea
Page 241 and 242: Accessories Order number Printer fo
Page 243 and 244: Weighing Equipment for the Laborato
Page 245 and 246:
Specifications Model SE2*** ME5***
Page 247 and 248:
Specifications Model ME235S ME235P
Page 249 and 250:
Specifications Model Read- Weighing
Page 251 and 252:
Page 253 and 254:
Specifications and accessories Mode
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Accessories for ME and SE2 Models O
Page 261 and 262:
Accessories for LE, CP and ED Model
Page 263 and 264:
Specifications Model Weighing capac
Page 265 and 266:
Which density kit for which balance
Page 267 and 268:
Equipment for Neutralizing Static E
Page 269 and 270:
Specifications Model Maximum Readab
Page 271 and 272:
Weight Sets (YCS) Features of Sarto
Page 273 and 274:
Metrological Weights (YCW) Class E1
Page 275 and 276:
Accessories for Weights (YAW) Acces
Page 277 and 278:
Specifications Capacity Readability
Page 279 and 280:
Moisture and Water Analysis Moistur
Page 281 and 282:
Specifications MA35|MA100|MA150 MA3
Page 283 and 284:
Accessories MA35|MA100| MA150 Acces
Page 285 and 286:
Technical Specifications|Accessorie
Page 287 and 288:
Specifications* Measuring range (%)
Page 289 and 290:
FACTS ® Service Progam Added Value
Page 291 and 292:
30 days commitment CONFIDENCE ® -
Page 293 and 294:
Training Examples for the Pharmaceu
Page 295 and 296:
Training Examples for the F & B Ind
Page 297 and 298:
America Asia|Pacific USA Sartorius
Page 299 and 300:
Application|Product name Page Appli
Page 301 and 302:
Index by Order Numbers Order no. Pa
Page 303 and 304:
Order no. Page Order no. Page Order
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
show all

Laboratory Product Catalogue Total Laboratory Science Support

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?