download - Knoll

Panel Specifications
Dividends Horizon
Post Connectors
‘‘X’’ configurations. For same-height applications,
post connectors are available as an assembly
and include the post, vertical trim and top cap.
For high-low panel-to-post applications, post
connectors are specified by component.
Post and Post Component Construction
powder coat finish
molded plastic
Attachment: Post connectors use the universal
panel connection hardware from adjacent panels
Electrical and data access: Posts
have cut-outs that match the wire and
cable access channels provided by panel
frames. This allows wire conduits and data
cables to be routed through the post at
the topway, beltway and base raceway.
Electrical and Communications
Dividends Horizon provides a logical
approach for planning and installing electrical
systems and communication cables.
Power is installed along the base raceway
with access available in both the base
raceway and optional beltway.
Topway Panel Frame Electrical
Allows data cables to be routed horizontally
and vertically within the panel.
Cables can be routed along the tops of panels,
routed through the interior of panels and
along both the beltway and base raceway.
The primary channel for distributing cable is
provided in the horizontal topway along the
top of panels. The topway allows cables to
be easily laid-in during initial installation and
also separates data from power to reduce the
chance of interference. A vertical wire pathway is
provided in the center of the topway. This allows
cables to be run vertically through the interior
of the panel to the beltway or base raceway
without the use of exterior cable managers.
Topway
Data Cabling Bend Radius
Base raceway
Topway Panel Frame Trough
Min. bend radius 1 1 / 2"
Max. bend radius 3"
Min. bend radius 1 1 / 2"
Max. bend radius 6"
Topway
"L" Post Connection
"L" Post Cover Attachment
Topway Panel Frame
Cable Routing
Vertical
wire pathway
Two-way
Top Cap
Beltway
Universal
Post
Corner Post Cover
Base
raceway
10