download - Knoll

Monolithic Panels
Specifications
Dividends Horizon
Monolithic Panel
Monolithic panels provide a single
fabric insert per panel side.
Preconfigured Dividends Horizon panels are
shipped complete with topway or full view
panel frame, base components, top cap,
panel to panel connection hardware and
one full height fabric panel insert per side.
Panels may also be ordered by components
for ‘‘Build-to-Spec’’ applications. This
includes when different fabric insert is
required on each side of the panel.
Monolithic Panel Insert Construction
Fabric laminated with web adhesive heat-cured
to 7 / 16" thick tackable acoustical board.
Monolithic Panel Ratings
• Noise Reduction Coefficient (NRC) rating: .70
• Sound Transmission Class (STC) rating: 11
Dividends Horizon panels meet the flame spread
and smoke generation criteria established in
UL1286 safety standard for office furnishings.
Monolithic Panel Insert Attachment
Fabric panel inserts flex to attach to the
troughs in the upper and lower horizontal
frame supports. Mounting spring clips are
attached to inserts for connection to the
vertical frame for additional support. No tools
are required for the insert attachment.
Top Cap Options
Three top cap options are available:
• Smooth Radius Plastic
• Radius Metal
• Flat Metal
Top Cap Construction
Smooth radiused plastic top caps are
made from extruded plastic. Radius
metal and flat metal top caps are
made from extruded aluminum.
Top Cap Attachment
Snaps onto the trough of a topway panel
frame. Retainer clips are included to
attach top caps to a full view frame.
If additional support for monolithic panel inserts
is required, a beltway cable tray can be installed.
Three Base Options Available:
• Base Raceway
• Tile to the Floor
• Open Base
Base Raceway covers are available
with or without knockouts.
See the preconfigured tiled panel pages
for more information on base options.
Carpet Grippers
Carpet grippers should be specified to
increase rigidity of unsupported panel runs.
The carpet grippers snap onto leveling glides
to prevent panel runs from shifting on carpet.
The glides rotate in carpet grippers to permit
leveling. Carpet grippers have a black finish.
Universal Panel Connectors
Dividends Horizon panels include universal
panel connectors to allow same-height straight
panel-to-panel connections, high-low straight
panel-to-panel connections and straight
and high-low panel-to-post connections.
Electrical
Panels 24" and wider will accept two duplex
receptacles per panel base side. 18" wide
panels will provide pass-through electrical
only. All electrical components are ordered
separately and must be field-installed.
Preconfigured Monolithic Panel
Topway
Panel frame
Panel Base Options
Base Raceway
Panel insert
Universal
panel
connectors
Tile-to-Floor
(single-sided only)
Base raceway cover
Open Base
14