download - Knoll

Y Leg Tables
Freestanding and Credenza Supported
Specifications
Dividends Horizon
Dividends Horizon Tables
The design details of Dividends Horizon tables
are consistent with the scale and visual language
of the Dividends Horizon system. This design
consistency makes Dividends Horizon tables
appropriate for use in conference, meeting,
private office and open plan office applications.
Dividends Horizon Y Leg tables are available in
two versions:
Freestanding Y Leg Tables
Freestanding Y Leg tables include a worksurface
and base assembly. All freestanding table sizes
are available with two Y legs and a horizontal
stretcher connecting the two columns.
In addition, 24 and 30 inch deep tables are
available without a stretcher. Tables without
stretcher include an integral worksurface
support plate. 36 and 42 inch deep tables
are available only with a stretcher.
Available Sizes
Credenza Supported Y Leg Tables
The unique Dividends Horizon Credenza
Supported Y Leg tables are designed to
be used in concert with Dividends Horizon
low credenzas, specified separately.
Credenza Supported Tables include one
Y Leg, credenza support spacer, and
aworksurface with integral stiffening plate.
Note: Credenza supported tables may be used
with laminate or veneer top credenzas only, and
are not compatible with steel top credenzas.
Available Sizes
Optional Edge Grommet
Edge grommets are optional and can be
factory installed centered along the rear
edge of rectangular or racetrack freestanding
or credenza supported Y Leg tables.
Construction
- Material: 0.028 inch thick high pressure
laminate or 0.6mm thick veneer on
1-1/8" particle board core
- Edge: plastic laminate tops have a
2mm edgeband; Techwood tops
have a 3/16 inch thick Techwood edge
- Stretcher: extruded aluminum
- Stiffening plate: 4 inch deep 12 gauge steel
plate (length varies)
- Foot: die cast aluminum
- Column: extruded aluminum with 3/16 inch
thick structural plate
- Credenza support spacer:
2-15/16 inches high x 9-5/8 inches wide
x 1-9/16 inches deep steel box with
a flat bracket on top
Note: Dividends Horizon tables are only available
in Knoll Core paint, laminate, and Techwood
finishes. Legacy finishes are not available. All paint
finishes have the Dividends Horizon textured paint
finish; this includes 613 Silver, which is a smooth
paint on all other Dividends Horizon products.
Note: The stiffening plate on tables without
a stretcher prevents the field installation of a
grommet or plexus box. (see illustration below)
24" Deep Freestanding Racetrack
Y Leg Table with Stretcher
24" Deep Credenza Supported
Racetrack Y Leg Table
24" Deep Freestanding Racetrack
Y Leg Table without Stretcher
Stiffening plate
332