download - Knoll

Panel End Trim and Panel Top Caps
Specifications
Dividends Horizon
Panel End Trim
Panel end trim in one of three trim
types ends a panel run.
Trim options available:
• Smooth Radius Plastic
• Metal Radius
• Metal Flat
Metal trim is constructed of extruded
aluminum, powder coated.
End trim includes the appropriate
attachment hardware and the panel end
cap for transition to panel top trim.
Thin Profile Panel End Trim
The thin profile panel end trim is an extruded
aluminum end cover that is designed to attach
to panel ends to provide a smooth end condition
for the end of panel runs. The thin profile end
trim and high low end trims are constructed
of extruded aluminum with a powder coated
finish. Thin profile panel end trim may only
be used with panels that have been selected
with the number 5 (flat metal) trim option.
High-Low Panel-to-Panel End Trim
High-low panel-to-panel end trim is
used to complete straight, high-low
panel-to-panel connections.
Construction and attachment is identical
to panel end trim and includes attachment
hardware and top/bottom end caps.
Up to ten, category 5 cables can be
laid-in to carry data from the upper panel
topway to the lower panel topway.
High-Low Thin Profile End Trim
High-low panel to panel end trim is used to
complete straight, high-low panel to panel
connections. Construction and attachment
is identical to the thin profile panel end
trim and includes attachment hardware.
High-low thin profile end trim may only be
used with panels that have been selected
with the number 5 (flat metal) trim option.
Note: When using the high-low thin profile
end trim, the higher and lower panels continue
to use the standard full-width top cap.
Panel Top Caps
Smooth plastic and metal panel top
caps are available in all panel widths.
Construction: Plastic top caps are
constructed of injection molded colored
plastic. Metal caps are powder coated steel.
Top caps with retainer clips must be ordered
when using top caps on full view panels.
Shortened High-Low Panel Top Caps
When specifying the enhanced smooth or
metal panel trim for a high-low panel end trim
condition, the top cap on the lower panel must
be shortened by 1 inch. Panel top caps can
be field cut to the new length, or shortened
top caps may be ordered separately.
Note: Thin profile end trim and high low end
trim are available in Knoll core finishes only.
Panel End Trim
Attachment
Hardware
Enhanced High-Low
Panel End Trim
Thin Profile End Trim
Panel End
Cap
End
Trim
134