download - Knoll

X Base Tables
Table Supports
Specifications
Dividends Horizon
X Base Tables
Dividends Horizon X base tables are designed
to be used along with the Dividends Horizon
system to create a consistent aesthetic
throughout the entire office. With various
height and width options, X base tables
can be used in a multitude of applications,
including collaboration areas in the open
plan, break rooms, and lounge areas.
Available with a round, square or rounded
square top shape with either a laminate or
veneer finish, a Dividends Horizon X base
table is appropriate for use in a vast array of
applications from the private office to the open
plan and even to lounge areas. The five height
options allow for the same table base to be
used in various applications while maintaining
visual consistency throughout the space.
X base tables include a top, support column,
and X base.
Available Sizes
Construction
Worksurface:
- Material: 0.028" thick high pressure
laminate or 0.6mm thick veneer
on 1-1/8" particle board core
- Edge: plastic laminate tops have a
2mm edgeband; Techwood tops have
a 3/16" thick Techwood edge.
Base:
- Foot: die cast aluminum
- Column: extruded aluminum with
3/16" thick structural plate
Table Supports
X bases may be specified separately for use
with an alternative table top. The appropriate
X base size must be selected according to the
width of the table top being used. X bases
are available in five heights and may be used
with table tops that are 30 to 48 inches wide.
Available Sizes
Heights: 17, 21, 28-1/2, 36, and 42 inches
Construction
Base:
- Foot: die cast aluminum
- Column: extruded aluminum with
3/16" thick structural plate
Note: Dividends Horizon tables are only available
in Knoll Core paint and laminate finishes. Legacy
finishes are not available. All paint finishes have
the Dividends Horizon textured paint finish; this
includes 613 Silver, which is a smooth paint
on all other Dividends Horizon products.
Square X Base Table
Rounded Square X Base Table
Round X Base Table
340