download - Knoll

Legacy Post Assemblies
Specifications
Dividends Horizon
Legacy Post Assemblies
Post assemblies are required for all ‘‘L’’, ‘‘T’’,
and ‘‘X’’ applications involving same-height
panels. Included with post assemblies are the
appropriate post, post cover and top cap.
Post connectors use the universal panel
connection hardware for attachment,
which is included with the post.
For high-low and post-to-panel
applications, posts and covers must be
ordered separately by component.
NOTE: LEGACY POSTS ARE FOR
EXISTING CUSTOMERS ONLY.
Legacy Post and Trim Construction
Posts are 3" square extruded aluminum
construction. Post covers are flat or
radius profile, metal or smooth textured
plastic extrusion with softly-radiused
molded plastic top cap. Metal post covers
are powder-coated 20 ga. steel.
Posts have cut-outs for electrical and data
access that match the wire and cable channels
provided by panel frames. This allows cables to
be routed through the post at the topway and
base raceway. Refer to the Beltway Electrical
Specification page for cable routing information.
The illustrations that follow are common
same-height post assembly configurations.
Choose the post assembly that
matches the required application.
Post ‘‘L’’ Configuration
‘‘L’’ assembly includes:
Post ‘‘L’’ Configuration
‘‘L’’ post assembly includes:
Post ‘‘T’’ Configuration
‘‘T’’ post assembly includes:
Trim options available:
Note: Not available with fabric
covered post covers.
Through-Post Access
for Power and Data
Two-Way Post Connection
Post Top Cap for
Enhanced Smooth Trim
Post "L" Configurations
Two-Way Top Cap
Two-Way
Top Cap
Topway Cable
Access
Universal
Post
Corner Post
Cover
Post "T" Configurations
Post and Cover Top Views
Three-Way Top Cap
Beltway Power
and Cable
Straight post
Cover
Corner Post Cover
Post "X" Configurations
Base Raceway
Power and Cable
Corner Post
Cover
Four-Way Top Cap
Straight Post Cover
128