download - Knoll

Panel End Trim and Panel Top Caps
Shortened Panel Top Caps
Dividends Horizon
description w pattern no. Plastic
Shortened Panel Top Caps (for lower panel on
high-low panel to panel application) Not for use
with DP6 Thin profile panel ends
Metal
P1
Metal
P2
Metal
P3
Veneer
14 DP( )PT14 $13. $40. $42. $44. $83.
17 DP( )PT17 13. 40. 42. 44. 91.
23 DP( )PT23 15. 40. 42. 44. 104.
29 DP( )PT29 20. 40. 42. 44. 118.
35 DP( )PT35 22. 40. 42. 44. 133.
41 DP( )PT41 22. 40. 42. 44. 149.
47 DP( )PT47 23. 40. 42. 44. 168.
53 DP( )PT53 n/a 44. 46. 48. 187.
59 DP( )PT59 27. 47. 49. 52. 210.
65 DP( )PT65 n/a 52. 55. 58. 231.
71 DP( )PT71 n/a 57. 61. 65. 244.
77 DP( )PT77 n/a 64. 67. 70. 258.
83 DP( )PT83 n/a 69. 72. 76. 272.
89 DP( )PT89 n/a 75. 79. 82. 288.
95 DP( )PT95 n/a 80. 85. 90. 306.
h* = Nominal height
Dimensions listed under hwdareactual to the nearest 1 /16
Ordering Information
Order Code
Included with:
Options
Panel Top Cap
1. Pattern Number
2. Trim Finish
Panel-to-Panel Top Cap Transition
1. Pattern Number
2. Trim Finish
Panel Top Cap
Example: DP5PT18, 117
DP5PT18 Pattern number
117 Soft Grey trim finish
Panel Top Cap
• Panel Top Cap
Panel Top Caps
Trim options
(2A) = Enhanced Smooth Radius
Plastic
(4) = Radius Metal
(5) = Flat Metal
(V4) = Radius Veneer
(V5) = Flat Veneer
138