download - Knoll

Tiled Laminate Inserts
Specifications
Dividends Horizon
Tiled Laminate Inserts
Dividends Horizon tiled laminate inserts
provide another material option for Dividends
Horizon panels and wall mount applications.
Tiled sizes are for use with frames from
36" to 78" high, and widths of up to 48" in
tile to raceway, open base and tile to floor
applications. Tiled laminate inserts may also be
wall mounted using wall mount tracks. Tiled
laminate inserts with matching surface and
edge are available in the following finishes:
(114) Folkstone Grey
(117) Soft Grey
(118) Bright White
(119) Pumice
Legacy finishes are not available.
tile support
Tiled Laminate Insert Construction
front and back surface
Tiled Insert Supports
All Dividends Horizon panel frames are prepunched
to accept tiled panel insert supports,
which span horizontally across the panel frame.
Tiled panel insert supports are mounted above
each tiled insert with the exception of the
uppermost insert which attaches to the upper
panel frame. D1 style insert supports are trim
finish to match top caps and raceway covers.
D2 Tile Support Mounting Brackets
D2 tile supports require the use of D2
tile support mounting brackets. One pair
of mounting brackets can be used to
attach D2 tile supports on one or both
sides of a panel at the installed height.
Tiled Laminate Insert Attachment
Laminate tiles are installed on one side or both
sides of a panel frame or attached to wall
mount tracks. Mounting clips are attached
to laminate inserts for connection to the
panel frame or vertical wall mount tracks.
Tiled Laminate Insert Planning Guidelines
Insert dimensions are nominal. Insert
configurations shown below are for one side
only. Laminate inserts are not compatible with
the slotted standard coat hook (DP2CHTP).
When attaching cantilevers to tiled panels,
they can only be hung at 28-1/2" worksurface
height. Overheads can only be attached to the
uppermost position of tiled panels. On 78"-high
panels the overhead may be positioned on
the 4th or 5th tile location from the bottom,
but not both locations of a single panel.
D1 External Reveal
Tile Supports
Tiled Insert Configurations
36"H Panels
42"H Panels
50"H Panels
64"H Panels
inserts
78"H Panels
inserts
supports
Tiled Insert
D2 Recessed Reveal
Tile Supports
57"H Panels
tile support
70