download - Knoll

Monolithic Laminate Inserts
Specifications
Dividends Horizon
Monolithic Laminate Inserts
Dividends Horizon monolithic laminate inserts
provide another material option for Dividends
Horizon panels and wall mount applications.
Monolithic tile sizes are for use with frames from
worksurface height to 57", and widths of up
to 48" in tile to raceway, open base and tile to
floor applications. Monolithic laminate tiles may
also be wall mounted using wall mount tracks.
Monolithic laminate inserts with matching surface
and edge are available in the following finishes:
(114) Folkstone Grey
(117) Soft Grey
(118) Bright White
(119) Pumice
Legacy finishes are not available.
Monolithic Laminate Insert Construction
Surface material: laminate on front and
back surface
Edge material: .5mm edgeband
Core material: particle board
Thickness: 7/16 inches
Monolithic Laminate Insert Attachment
Laminate tiles are installed on one side or
both sides of a panel frame, or attach to wall
mount tracks. Mounting clips are attached
to laminate inserts for connection to the
panel frame or vertical wall mount tracks.
Note: Insert dimensions are nominal.
Insert configurations shown below are for
one side only.
Note: Laminate inserts are not compatible with
the slotted standard coat hook (DP2CHTP).
Note: Worksurface height monolithic tiles
are to be used with worksurface height panel
frames only.
Monolithic Laminate Insert
Monolithic Laminate Insert Configurations
Worksurface Height
monolithic insert
Monolithic Laminate Insert
36"H Panel Frames
42"H Panel Frames
50"H Panel Frames
57"H Panel Frames
60