download - Knoll

More documents

Recommendations

Info

Curvilinear Half- and Corner-Round Worksurfaces Specifications Dividends Horizon Curvilinear Half-Round Worksurfaces Curvilinear half-round worksurfaces are sized to match up to the width of two back-to-back 24" deep or two back-toback 30" deep freestanding desks. Panel-supported half-round worksurfaces are notched along the flat end to accommodate the panel end trim. Attachment is with a column support, T leg or A leg (must be ordered separately) at the free end of the worksurface and with flat brackets on the flat end of the half-round worksurface. The flat brackets attach to the adjacent freestanding desks. Flat brackets are black. Available Sizes 1 / 4 Note: All Dividends Horizon worksurfaces include a 1 / 2" wire drop at the rear edge. When used back to back with Half-Round worksurface, these two 1 / 2" wire drops will meet to form a 1" space between worksurfaces. Transition Worksurfaces Attachment is with a column support, T leg or A leg (must be ordered separately) at the free end of the worksurface and with flat brackets on the flat end of the transition worksurface. The flat brackets attach to the adjacent freestanding desks. Flat brackets are black. Available Sizes 1 / 4 Corner Round Worksurfaces Corner-round worksurfaces are designed to ‘‘finish’’ a run of panel-mounted worksurfaces. Corner-round may be specified in two ways. In a 90° ‘‘L’’ configuration, a notched corner-round worksurface is used to wrap around the panels. Two cantilevers and flat brackets (must be ordered separately) support the corner-round worksurface. In an end run configuration, the corner-round worksurface is handed and must be specified as a left-hand or a right-hand top. One cantilever with a flat bracket and one panelto-worksurface bracket (must be ordered separately) support the corner-round top. Available Sizes Optional Edge Grommets Grommets are not available for worksurfaces on this page. Curvilinear Half-Round Worksurfaces (without panels) Curvilinear Half-Round Worksurfaces (with panels) Corner-Round Worksurface Corner-Round Applications Notched Corner Worksurfae Corner-Round - Notched “L” Configuration Corner-Round - End Run Configuration (right-hand shown) Quarter-round Surface 312
Curvilinear Half- and Corner-Round Worksurfaces Mixed Depths Dividends Horizon description type w return depth t pattern no. laminate w/ ABS edge laminate w/ woodgrain edge laminate w/ metal edge techwood w/ techwood edge Curvilinear Half-Round Worksurface w/o panels 48 18 1 1 /4 D1H4818 $359. $397. $432. $987. w/o panels 60 24 1 1 /4 D1H6024 495. 546. 595. 1,073. w/panels 51 18 1 1 /4 D1H5118P 367. 404. 439. 1,029. w/panels 63 24 1 1 /4 D1H6324P 501. 553. 604. 1,117. Transition Worksurface w panels 51 24 1 1 /4 D2H5124P 441. 485. 528. 1,146. w panels 51 36 1 1 /4 D2H5136P 450. 493. 542. 1,186. w panels 51 48 1 1 /4 D2H5148P 458. 503. 551. 1,222. w/o panels 48 24 1 1 /4 D2H4824 436. 477. 521. 1,036. w/o panels 48 36 1 1 /4 D2H4836 442. 486. 533. 1,073. w/o panels 48 48 1 1 /4 D2H4848 453. 496. 544. 1,110. Corner Round Worksurface left 23 13 /16 23 1 /2 1 1 /4 D1CRL24 193. 210. 229. 840. notched 23 1 /2 23 1 /2 1 1 /4 D1CRN24 193. 210. 229. 840. right 23 13 /16 23 1 /2 1 1 /4 D1CRR24 193. 210. 229. 840. Ordering Information Order Code Included with: Options Half-Round Worksurface 1. Pattern Number 2. Top Finish Type 3. Edge Finish Transition Worksurface 1. Pattern Number 2. Top Finish Type 3. Edge Finish Corner-Round Worksurface 1. Pattern Number 2. Top Finish Type 3. Edge Finish Half-Round Worksurface Example: D1H 5118P, 118, 118 D1H Pattern Number 5118P 118 Bright White Laminate 118 Bright White Edge Band Transition Worksurface Example: D2H 5136P, 117, 117 D2H Pattern Number 5136P 117 Soft Grey Laminate 117 Soft Grey Edge Band Half-Round Worksurface • Worksurface • 2 flat brackets Note: Support column must be ordered separately. Transition Worksurface • Worksurface • 2 flat brackets Note: Support column must be ordered separately. Corner Round Worksurface • Worksurface Note: 2 cantilevers must be ordered separately. Note: An upcharge applies when specifying Legacy laminates. See Legacy finish page. Half-Round Worksurface • Woodgrain ABS edge • Metal edge • Techwood edge Transition Worksurface • Woodgrain ABS edge • Metal edge • Techwood edge Corner-Round Worksurface • Woodgrain ABS edge • Metal edge • Techwood edge Curvilinear Half-Round and Transition Worksurface Option Add an ’F’ suffix to the pattern number when using with flat profile panel trim. Worksurfaces 313
Page 1 and 2:
Table of Contents Dividends Horizon
Page 3 and 4:
Knoll and Sustainable Design Each y
Page 5 and 6:
Knoll Color Program Finishes Divide
Page 7 and 8:
Dividends Horizon Fabrics Dividends
Page 9 and 10:
Panel Specifications Dividends Hori
Page 11 and 12:
Panel Specifications Dividends Hori
Page 13 and 14:
Panel Specifications Planning Guide
Page 15 and 16:
Monolithic Panels Standard Base Rac
Page 17 and 18:
Monolithic Panels Open Base Worksur
Page 19 and 20:
Monolithic Panels Tile to Floor One
Page 21 and 22:
Monolithic Panels Tile to Floor One
Page 23 and 24:
Tiled Panels Specifications Panel B
Page 25 and 26:
Tiled Panels Base Raceway 57,64 and
Page 27 and 28:
Tiled Panels Open Base 57,64 and 78
Page 29 and 30:
Tiled Panels Tile To Floor One Side
Page 31 and 32:
Tiled Panels 28 Lower Tile and Base
Page 33 and 34:
description h w d pattern no. 78 Hi
Page 35 and 36:
Tiled Panels 28 Lower Tile and Open
Page 37 and 38:
Tiled Panels 28 Lower Tile and Tile
Page 39 and 40:
description h w d pattern no. 78 Hi
Page 41 and 42:
Beltway Panels Standard Base Racewa
Page 43 and 44:
Beltway Panels Tile to the Floor 42
Page 45 and 46:
Beltway Panels Tile to the Floor 78
Page 47 and 48:
Topway and Full View Panel Frame As
Page 49 and 50:
Topway and Full View Panel Frame As
Page 51 and 52:
This page intentionally left blank
Page 53 and 54:
Stack Frames D1 Style With External
Page 55 and 56:
Page 57 and 58:
Monolithic Panel Fabric Inserts For
Page 59 and 60:
Page 61 and 62:
Monolithic Laminate Inserts For Wor
Page 63 and 64:
Monolithic Laminate Inserts For 50
Page 65 and 66:
Page 67 and 68:
Tiled Fabric Inserts 7,10 and 14 Hi
Page 69 and 70:
Tiled Fabric Inserts Tile Supports
Page 71 and 72:
Tiled Laminate Inserts 7,10,14,21 a
Page 73 and 74:
Page 75 and 76:
Beltway Inserts Lower Fabric Insert
Page 77 and 78:
Beltway Inserts Lower Laminate Inse
Page 79 and 80:
High Acoustic Core Inserts Sound Tr
Page 81 and 82:
Window Insert Kits Single Pane Wind
Page 83 and 84:
Markerboard Tiles Specifications Di
Page 85 and 86:
Markerboard Tiles 24 and 28 High an
Page 87 and 88:
Steel Insert Kits 7,10,14 and 21 Hi
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Slatwall Tiles 7,14,21 and 28 High
Page 97 and 98:
Technology Tiles Fabric Dividends H
Page 99 and 100:
Page 101 and 102:
Rolling Door 57,64 and 78 High Divi
Page 103 and 104:
Open Weave and Glass Screens Specif
Page 105 and 106:
Open Weave and Glass Screens Open W
Page 107 and 108:
Open Weave and Glass Screens Triang
Page 109 and 110:
Open Weave and Glass Screens Rectan
Page 111 and 112:
Open Weave and Glass Stacking Scree
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Frameless Add Up Clear, Powder and
Page 119 and 120:
Page 121 and 122:
Dividends Horizon DP7 Post Assembli
Page 123 and 124:
Dividends Horizon DP7 Post Componen
Page 125 and 126:
Dividends Horizon DP7 Post Componen
Page 127 and 128:
Page 129 and 130:
Legacy Post Assemblies L, T and X C
Page 131 and 132:
Legacy Post Components Post, Post T
Page 133 and 134:
Page 135 and 136:
Panel End Trim and Panel Top Caps P
Page 137 and 138:
Panel End Trim and Panel Top Caps T
Page 139 and 140:
Page 141 and 142:
Panel Wall Starter, Panel-to-Panel
Page 143 and 144:
Wall Mount Tracks and Components Sp
Page 145 and 146:
Wall Mount Tracks and Components 57
Page 147 and 148:
Panel Rigidizer Brackets, Coat Hook
Page 149 and 150:
Page 151 and 152:
Concealed Post Post Components Spec
Page 153 and 154:
Concealed Post Post Components Pane
Page 155 and 156:
Concealed Post Monolithic Panel Ins
Page 157 and 158:
Concealed Post Monolithic Panel Hal
Page 159 and 160:
Concealed Post Monolithic Panel Hal
Page 161 and 162:
Concealed Post Monolithic Panel Cen
Page 163 and 164:
Concealed Post Monolithic Panel Cen
Page 165 and 166:
Concealed Post Monolithic Panel Dou
Page 167 and 168:
Concealed Post Monolithic Panel Dou
Page 169 and 170:
Concealed Post Frameless Add Up Cle
Page 171 and 172:
120° Planning Specifications Divid
Page 173 and 174:
120° Planning 120° Post Assemblie
Page 175 and 176:
Page 177 and 178:
120° Planning 120° Worksurface an
Page 179 and 180:
Electrical Specifications (2+2) Ele
Page 181 and 182:
Base Raceway Electrical Power Modul
Page 183 and 184:
Base Raceway Electrical Power Modul
Page 185 and 186:
Page 187 and 188:
Receptacles Knockout Replacement Co
Page 189 and 190:
Vertical Electrical Power Module, E
Page 191 and 192:
Vertical Electrical Power Module, E
Page 193 and 194:
Page 195 and 196:
Beltway Electrical Specifications D
Page 197 and 198:
Beltway Electrical Power Modules, P
Page 199 and 200:
Electrical Infeeds and Power Poles
Page 201 and 202:
Page 203 and 204:
New York City, San Francisco and Ch
Page 205 and 206:
Page 207 and 208:
Cable Management Accessories Divide
Page 209 and 210:
Page 211 and 212:
Flip-Up Door Overheads Panel- and W
Page 213 and 214:
Page 215 and 216:
Sliding Door Overheads 14 High Pane
Page 217 and 218:
Sliding Door Overheads 21 High Pane
Page 219 and 220:
Sliding Door Overheads 14 High Wall
Page 221 and 222:
Sliding Door Overheads 14 High Shar
Page 223 and 224:
Sliding Door Overheads 14 High Indi
Page 225 and 226:
Sliding Door Overheads 14 High Indi
Page 227 and 228:
Up Mounted Overheads Dividends and
Page 229 and 230:
Overhead Bookshelf and Corner Shelf
Page 231 and 232:
Mounting Brackets and Accessories O
Page 233 and 234:
Page 235 and 236:
Task Lights Cord Management Clip Di
Page 237 and 238:
Pedestals Dividends Floorstanding,
Page 239 and 240:
Pedestals Series 2 Floorstanding, D
Page 241 and 242:
Page 243 and 244:
Pedestals Accessories Drawer Organi
Page 245 and 246:
Credenzas Single Depth with Steel T
Page 247 and 248:
Credenzas Single Depth with Steel T
Page 249 and 250:
Credenzas Single Depth with Laminat
Page 251 and 252:
Credenzas Single Depth with Laminat
Page 253 and 254:
Credenzas Single Depth with Veneer
Page 255 and 256:
Credenzas Single Depth with Veneer
Page 257 and 258:
Credenzas Double Depth with Laminat
Page 259 and 260:
Credenzas Double Depth with Laminat
Page 261 and 262: Credenzas Double Depth with Veneer
Page 263 and 264: Credenzas Double Depth with Veneer
Page 265 and 266: This page intentionally left blank
Page 267 and 268: Flip-up Door Overdesk and Tackboard
Page 271 and 272: Sliding Door Overdesks 57 High Cabi
Page 279 and 280: Sliding Door Overdesks with Tackboa
Page 291 and 292: Worksurface Specifications Grain Di
Page 293 and 294: Worksurface Specifications Worksurf
Page 295 and 296: Rectangular Worksurfaces 18 and 24
Page 297 and 298: Rectangular Worksurfaces 19 Deep Di
Page 299 and 300: Rectangular Worksurfaces 30 and 36
Page 301 and 302: Curvilinear Wave End Worksurfaces M
Page 303 and 304: Trapezoidal Worksurfaces Dividends
Page 305 and 306: Corner Worksurfaces Rectilinear and
Page 307 and 308: Corner Worksurfaces Curvilinear Cor
Page 309 and 310: Corner Worksurfaces Curvilinear Cor
Page 311: Peninsula Worsurfaces ‘‘D’’
Page 315 and 316: Transaction Counter Worksurfaces Re
Page 317 and 318: Blended ‘‘D’’ and Curviline
Page 319 and 320: Half Round and Corner Round with Ca
Page 323 and 324: Panel Mounted Worksurface Brackets
Page 327 and 328: Screen-to-Worksurface Brackets Scre
Page 329 and 330: Panel Mounted Worksurface Supports
Page 331 and 332: Peninsula Worksurface Supports Roun
Page 333 and 334: Y Leg Tables Freestanding Rectangul
Page 335 and 336: Y Leg Tables Freestanding Racetrack
Page 337 and 338: Y Leg Tables Credenza Supported Rec
Page 341 and 342: X Base Tables Square Table Tops 17,
Page 343 and 344: X Base Tables Rounded Square Table
Page 345 and 346: Table Supports X Bases Credenza Sup
Page 349 and 350: Conference Tables Rectangular Table
Page 351 and 352: Conference Tables Boat Shape Table
Page 353 and 354: Preconfigured Desks Series 2 Single
Page 355 and 356: Preconfigured Desks Single and Doub
Page 357 and 358: Preconfigured Desks Series 2 Freest
Page 359 and 360: Preconfigured Desks Freestanding Co
Page 361 and 362: Preconfigured Desks Series 2 Return
Page 363 and 364:
Preconfigured Desks Returns and Bri
Page 365 and 366:
Desk Components End Units Desk End,
Page 367 and 368:
Desk Components Half Height Back Pa
Page 369 and 370:
Desk Components Full Back Panels Fo
Page 371 and 372:
Desk Accessories Drawer Organizers,
Page 373 and 374:
Alpha-Numeric Index pattern no. pag
Page 375 and 376:
Dividends Horizon pattern no. page
Page 377 and 378:
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
Selling Policy This ...............
Page 387 and 388:
KnollKey Lock Program KnollKey Lock
show all

download - Knoll

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?