download - Knoll

More documents

Recommendations

Info

New York City, San Francisco and Chicago Electrical Specifications Dividends Horizon New York City Hardwire Infeeds The New York City hardwire infeed is comprised of a junction box and a power connector exiting from one side. New York City infeeds are available in one size which mount within any base raceway 24" or wider. The New York City infeed takes the place of a power module and prevents the installation of duplex receptacles in the panel housing the infeed. The hardwire infeed’s power connector plugs into a power module which must be located in the adjacent panel. The New York City infeed can be rotated to either the right or left side of the base raceway to provide power to either the adjacent left or right panel. a separate power jumper the length of the panel containing the infeed. The power jumper connects panel power modules located at either side of the panel containing the NYC hardwire infeed and is routed within the same raceway as the NYC hardwire infeed. The power jumper is then routed in the opposite direction and connects to a power module located in the adjacent panel on the panel’s other side (refer to the diagram below). The panel containing the NYC hardwire infeed must be specified without base raceway cover knockouts. A template for drilling the base raceway cover to accept the NYC hardwire infeed conduit is included. Chicago Hardwire Pre-wired modular electrical systems are not permitted in the City of Chicago. All electrical In order to conform to City of Chicago electrical codes, a hardwire receptacle raceway kit(s) must be installed in all panel base raceways conform to the City of Chicago electrical code for base power infeed, the hardwire infeed raceway kit must be installed within the panel base raceway. Hardwire receptacle raceway kit(s) and hardwire infeed raceway kit(s) mount in the base raceway between the panel feet and are available in 24" to 48" widths. Hardwire receptacle raceway kits are secured by four screws. In addition, the base raceway covers on both sides of a panel with hardwire receptacle raceway kits must be secured with two screws each. A template for drilling attachment holes in base raceway covers is included with the hardwire receptacle raceway kit. Optional Chicago base raceway covers can be ordered separately to replace existing covers if pre-drilled covers are desired. When passing (jumping) hardwired power through panels, panels must be specified without knockouts in the base raceway to conform to the City of Chicago electrical code. All panels containing hardwire receptacle raceway kits must be specified with base raceway knockouts. Note: Dividends Horizon beltway electrical is not available with Chicago hardwire. New York Electrical Configurations NYC Infeeds are reversible and one direction New York Electrical NYC Infeeds (positioned at left side of raceway) New York City Infeed NYC Infeeds (positioned at right side of raceway) To provide two direction power Power Jumper Chicago Electrical Hardwire R eceptacle R aceway Kit (Chicago) Power Module NYC Power Infeed Power Module Hardwire Infeed R aceway Kit(Chicago) R aceway Cover 202
New York City, San Francisco and Chicago Electrical Infeeds and Retrofit Kit Dividends Horizon description type l pattern no. list Hardwire Infeed (NYC) - 1 Direction 2+2 DE18 B1NY1 $586. 3+1 DE1E B1NY1 509. 3+3 DE1T B1NY1 655. Base Power Infeed (San Francisco) 2+2 56 DE18 BI56( )SF 201. 3+1 56 DE1E BI56( )SF 182. 3+3 56 DE1T BI56( )SF 237. Reversible Base Power Infeed (San Francisco) 2+2 56 DE18 RBI56SF 244. 3+1 56 DE1E RBI56SF 222. 3+3 56 DE1T RBI56SF 293. Electrical Retrofit Kit (Chicago) (for electrical on new panel base raceway) DP7CERK 64. Electrical/Data Components Ordering Information Order Code Included with: Options Hardwire Infeed (NYC) 1. Pattern Number Hardwire Infeed (NYC) Example: DE1E B1NY1 DE1E Pattern Number B1NY1 Hardwire Infeed (NYC) • Junction box with power connector and infeed • Ceiling trim plate • Attachment screws Hardwire Infeed (NYC) Power System • 3+1 • 2+2 • 3+3 San Francisco Infeed direction option (L) = Left (R) = Right Note: The electrical retrofit kit provides brackets that connect Chicago Electrical components that were manufactured prior to June 2008 to DP7 panel base raceways. 203
Page 1 and 2:
Table of Contents Dividends Horizon
Page 3 and 4:
Knoll and Sustainable Design Each y
Page 5 and 6:
Knoll Color Program Finishes Divide
Page 7 and 8:
Dividends Horizon Fabrics Dividends
Page 9 and 10:
Panel Specifications Dividends Hori
Page 11 and 12:
Panel Specifications Dividends Hori
Page 13 and 14:
Panel Specifications Planning Guide
Page 15 and 16:
Monolithic Panels Standard Base Rac
Page 17 and 18:
Monolithic Panels Open Base Worksur
Page 19 and 20:
Monolithic Panels Tile to Floor One
Page 21 and 22:
Monolithic Panels Tile to Floor One
Page 23 and 24:
Tiled Panels Specifications Panel B
Page 25 and 26:
Tiled Panels Base Raceway 57,64 and
Page 27 and 28:
Tiled Panels Open Base 57,64 and 78
Page 29 and 30:
Tiled Panels Tile To Floor One Side
Page 31 and 32:
Tiled Panels 28 Lower Tile and Base
Page 33 and 34:
description h w d pattern no. 78 Hi
Page 35 and 36:
Tiled Panels 28 Lower Tile and Open
Page 37 and 38:
Tiled Panels 28 Lower Tile and Tile
Page 39 and 40:
description h w d pattern no. 78 Hi
Page 41 and 42:
Beltway Panels Standard Base Racewa
Page 43 and 44:
Beltway Panels Tile to the Floor 42
Page 45 and 46:
Beltway Panels Tile to the Floor 78
Page 47 and 48:
Topway and Full View Panel Frame As
Page 49 and 50:
Topway and Full View Panel Frame As
Page 51 and 52:
This page intentionally left blank
Page 53 and 54:
Stack Frames D1 Style With External
Page 55 and 56:
Page 57 and 58:
Monolithic Panel Fabric Inserts For
Page 59 and 60:
Page 61 and 62:
Monolithic Laminate Inserts For Wor
Page 63 and 64:
Monolithic Laminate Inserts For 50
Page 65 and 66:
Page 67 and 68:
Tiled Fabric Inserts 7,10 and 14 Hi
Page 69 and 70:
Tiled Fabric Inserts Tile Supports
Page 71 and 72:
Tiled Laminate Inserts 7,10,14,21 a
Page 73 and 74:
Page 75 and 76:
Beltway Inserts Lower Fabric Insert
Page 77 and 78:
Beltway Inserts Lower Laminate Inse
Page 79 and 80:
High Acoustic Core Inserts Sound Tr
Page 81 and 82:
Window Insert Kits Single Pane Wind
Page 83 and 84:
Markerboard Tiles Specifications Di
Page 85 and 86:
Markerboard Tiles 24 and 28 High an
Page 87 and 88:
Steel Insert Kits 7,10,14 and 21 Hi
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Slatwall Tiles 7,14,21 and 28 High
Page 97 and 98:
Technology Tiles Fabric Dividends H
Page 99 and 100:
Page 101 and 102:
Rolling Door 57,64 and 78 High Divi
Page 103 and 104:
Open Weave and Glass Screens Specif
Page 105 and 106:
Open Weave and Glass Screens Open W
Page 107 and 108:
Open Weave and Glass Screens Triang
Page 109 and 110:
Open Weave and Glass Screens Rectan
Page 111 and 112:
Open Weave and Glass Stacking Scree
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Frameless Add Up Clear, Powder and
Page 119 and 120:
Page 121 and 122:
Dividends Horizon DP7 Post Assembli
Page 123 and 124:
Dividends Horizon DP7 Post Componen
Page 125 and 126:
Dividends Horizon DP7 Post Componen
Page 127 and 128:
Page 129 and 130:
Legacy Post Assemblies L, T and X C
Page 131 and 132:
Legacy Post Components Post, Post T
Page 133 and 134:
Page 135 and 136:
Panel End Trim and Panel Top Caps P
Page 137 and 138:
Panel End Trim and Panel Top Caps T
Page 139 and 140:
Page 141 and 142:
Panel Wall Starter, Panel-to-Panel
Page 143 and 144:
Wall Mount Tracks and Components Sp
Page 145 and 146:
Wall Mount Tracks and Components 57
Page 147 and 148:
Panel Rigidizer Brackets, Coat Hook
Page 149 and 150:
Page 151 and 152: Concealed Post Post Components Spec
Page 153 and 154: Concealed Post Post Components Pane
Page 155 and 156: Concealed Post Monolithic Panel Ins
Page 157 and 158: Concealed Post Monolithic Panel Hal
Page 159 and 160: Concealed Post Monolithic Panel Hal
Page 161 and 162: Concealed Post Monolithic Panel Cen
Page 163 and 164: Concealed Post Monolithic Panel Cen
Page 165 and 166: Concealed Post Monolithic Panel Dou
Page 167 and 168: Concealed Post Monolithic Panel Dou
Page 169 and 170: Concealed Post Frameless Add Up Cle
Page 171 and 172: 120° Planning Specifications Divid
Page 173 and 174: 120° Planning 120° Post Assemblie
Page 175 and 176: This page intentionally left blank
Page 177 and 178: 120° Planning 120° Worksurface an
Page 179 and 180: Electrical Specifications (2+2) Ele
Page 181 and 182: Base Raceway Electrical Power Modul
Page 183 and 184: Base Raceway Electrical Power Modul
Page 187 and 188: Receptacles Knockout Replacement Co
Page 189 and 190: Vertical Electrical Power Module, E
Page 191 and 192: Vertical Electrical Power Module, E
Page 195 and 196: Beltway Electrical Specifications D
Page 197 and 198: Beltway Electrical Power Modules, P
Page 199 and 200: Electrical Infeeds and Power Poles
Page 201: This page intentionally left blank
Page 207 and 208: Cable Management Accessories Divide
Page 211 and 212: Flip-Up Door Overheads Panel- and W
Page 215 and 216: Sliding Door Overheads 14 High Pane
Page 217 and 218: Sliding Door Overheads 21 High Pane
Page 219 and 220: Sliding Door Overheads 14 High Wall
Page 221 and 222: Sliding Door Overheads 14 High Shar
Page 223 and 224: Sliding Door Overheads 14 High Indi
Page 225 and 226: Sliding Door Overheads 14 High Indi
Page 227 and 228: Up Mounted Overheads Dividends and
Page 229 and 230: Overhead Bookshelf and Corner Shelf
Page 231 and 232: Mounting Brackets and Accessories O
Page 235 and 236: Task Lights Cord Management Clip Di
Page 237 and 238: Pedestals Dividends Floorstanding,
Page 239 and 240: Pedestals Series 2 Floorstanding, D
Page 243 and 244: Pedestals Accessories Drawer Organi
Page 245 and 246: Credenzas Single Depth with Steel T
Page 247 and 248: Credenzas Single Depth with Steel T
Page 249 and 250: Credenzas Single Depth with Laminat
Page 251 and 252: Credenzas Single Depth with Laminat
Page 253 and 254:
Credenzas Single Depth with Veneer
Page 255 and 256:
Credenzas Single Depth with Veneer
Page 257 and 258:
Credenzas Double Depth with Laminat
Page 259 and 260:
Credenzas Double Depth with Laminat
Page 261 and 262:
Credenzas Double Depth with Veneer
Page 263 and 264:
Credenzas Double Depth with Veneer
Page 265 and 266:
Page 267 and 268:
Flip-up Door Overdesk and Tackboard
Page 269 and 270:
Page 271 and 272:
Sliding Door Overdesks 57 High Cabi
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Sliding Door Overdesks with Tackboa
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Worksurface Specifications Grain Di
Page 293 and 294:
Worksurface Specifications Worksurf
Page 295 and 296:
Rectangular Worksurfaces 18 and 24
Page 297 and 298:
Rectangular Worksurfaces 19 Deep Di
Page 299 and 300:
Rectangular Worksurfaces 30 and 36
Page 301 and 302:
Curvilinear Wave End Worksurfaces M
Page 303 and 304:
Trapezoidal Worksurfaces Dividends
Page 305 and 306:
Corner Worksurfaces Rectilinear and
Page 307 and 308:
Corner Worksurfaces Curvilinear Cor
Page 309 and 310:
Corner Worksurfaces Curvilinear Cor
Page 311 and 312:
Peninsula Worsurfaces ‘‘D’’
Page 313 and 314:
Curvilinear Half- and Corner-Round
Page 315 and 316:
Transaction Counter Worksurfaces Re
Page 317 and 318:
Blended ‘‘D’’ and Curviline
Page 319 and 320:
Half Round and Corner Round with Ca
Page 321 and 322:
Page 323 and 324:
Panel Mounted Worksurface Brackets
Page 325 and 326:
Page 327 and 328:
Screen-to-Worksurface Brackets Scre
Page 329 and 330:
Panel Mounted Worksurface Supports
Page 331 and 332:
Peninsula Worksurface Supports Roun
Page 333 and 334:
Y Leg Tables Freestanding Rectangul
Page 335 and 336:
Y Leg Tables Freestanding Racetrack
Page 337 and 338:
Y Leg Tables Credenza Supported Rec
Page 339 and 340:
Page 341 and 342:
X Base Tables Square Table Tops 17,
Page 343 and 344:
X Base Tables Rounded Square Table
Page 345 and 346:
Table Supports X Bases Credenza Sup
Page 347 and 348:
Page 349 and 350:
Conference Tables Rectangular Table
Page 351 and 352:
Conference Tables Boat Shape Table
Page 353 and 354:
Preconfigured Desks Series 2 Single
Page 355 and 356:
Preconfigured Desks Single and Doub
Page 357 and 358:
Preconfigured Desks Series 2 Freest
Page 359 and 360:
Preconfigured Desks Freestanding Co
Page 361 and 362:
Preconfigured Desks Series 2 Return
Page 363 and 364:
Preconfigured Desks Returns and Bri
Page 365 and 366:
Desk Components End Units Desk End,
Page 367 and 368:
Desk Components Half Height Back Pa
Page 369 and 370:
Desk Components Full Back Panels Fo
Page 371 and 372:
Desk Accessories Drawer Organizers,
Page 373 and 374:
Alpha-Numeric Index pattern no. pag
Page 375 and 376:
Dividends Horizon pattern no. page
Page 377 and 378:
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
Selling Policy This ...............
Page 387 and 388:
KnollKey Lock Program KnollKey Lock
show all

download - Knoll

Create successful ePaper yourself

Delete template?

Save as template?