download - Knoll

Rectangular Worksurfaces
30 and 36 Deep Specifications
Dividends Horizon
Rectangular Worksurfaces
Dividends Horizon rectangular worksurfaces
are universal and can be used in:
See page 166 for the following:
Available Sizes
Panel-Hung Applications
When a worksurface spans multiple
panels a cantilever or freestanding floor
worksurfaces cannot be supported
by cantilevers. Worksurfaces over
Freestanding Applications
Refer to the freestanding desk section for
‘‘preconfigured’’ applications. Rectangular
worksurfaces in ‘‘build-to-spec’’ applications
use pedestals and end units as the primary
support for freestanding desks. Back panels
The most common freestanding applications
involve desks, returns and bridge units
in ‘‘L’’ and ‘‘U’’ configurations.
Overhang Desks
Overhang desks can be ordered by component
by specifying desk supports and worksurfaces
separately. To specify, select either a 30" or 36"
deep worksurface in 60", 66" or 72" widths.
Back panels should be specified to match the
worksurface width while supports (pedestals
or end units) should be one size smaller than
the worksurface depth to provide a 6" front
overhang. Example: 36" deep worksurface
with 30" deep pedestals or end units.
Bridge
Unit
Single
Pedestal Desk
Overhang
Desk
30"D Rectangular Worksurface
Pedestal
Return
Single
Pedestal Desk
Worksurfaces over 48"W
require mid-span support
36"D Rectangular Worksurface
Freestanding Desk Applications
298