download - Knoll

Y Leg Tables
Freestanding Rectangular Table Top
36 and 42 Deep
Dividends Horizon
description w * w d t h pattern no.
36 Deep Rectangular with
(2) Y-Legs, No Grommet
Laminate
Top
P1 Paint
Laminate
Top
P2 Paint
Laminate
Top
P3 Paint
Techgrain
Top
P1 Paint
Techgrain
Top
P2 Paint
Techgrain
Top
P3 Paint
60 59 13 /16 35 1 /2 1 1 /4 28 1 /2 DT1ARY6036N $1,639. $1,800. $1,874. $1,891. $2,080. $2,162.
66 65 13 /16 35 1 /2 1 1 /4 28 1 /2 DT1ARY6636N 1,667. 1,833. 1,907. 1,927. 2,121. 2,204.
72 71 13 /16 35 1 /2 1 1 /4 28 1 /2 DT1ARY7236N 1,695. 1,865. 1,941. 1,964. 2,161. 2,247.
78 77 13 /16 35 1 /2 1 1 /4 28 1 /2 DT1ARY7836N 1,724. 1,897. 1,973. 2,001. 2,202. 2,290.
84 83 13 /16 35 1 /2 1 1 /4 28 1 /2 DT1ARY8436N 1,752. 1,928. 2,005. 2,039. 2,243. 2,332.
90 89 13 /16 35 1 /2 1 1 /4 28 1 /2 DT1ARY9036N 1,781. 1,959. 2,038. 2,076. 2,285. 2,374.
96 95 13 /16 35 1 /2 1 1 /4 28 1 /2 DT1ARY9636N 1,811. 1,991. 2,071. 2,114. 2,325. 2,416.
42 Deep Rectangular with
(2) Y-Legs, No Grommet
84 83 13 /16 42 1 /2 1 1 /4 28 1 /2 DT1ARY8442N 1,797. 1,979. 2,059. 2,282. 2,510. 2,611.
90 89 13 /16 42 1 /2 1 1 /4 28 1 /2 DT1ARY9042N 1,836. 2,021. 2,101. 2,314. 2,545. 2,646.
96 95 13 /16 42 1 /2 1 1 /4 28 1 /2 DT1ARY9642N 1,864. 2,051. 2,132. 2,344. 2,579. 2,682.
w* = nominal width
Dimensions listed under wdthareactual to the nearest 1 /16
Ordering Information
Order Code
Included with:
Options
Freestanding Y Leg Table:
1. Pattern number
2. Base/Stretcher Paint Finish
3. Top Finish
4. Edge Finish
Freestanding Y Leg Table:
Example: DT1ARY6024NS, 114,
114, 114
DT1 Dividends Horizon
Table
A 2 Leg table assembly
R Rectangular shape
Y Y Leg Base
60 Overall width in inches
24 Overall depth in inches
N No grommet
S Stretcher
114 Base/ stretcher paint
finish
114 Laminate top finish
114 Edgeband finish
Freestanding Y Leg Table:
• (2) Y Legs
• Hardware kit
• Table top
• Stretcher or stiffening plate
Note: Y Leg tables are finished with
textured paint, including 613 Silver.
Note: Y Leg Tables are only
available in Knoll core finishes.
Grommet Option:
• To specify an edge grommet,
replace the ‘‘N’’ suffix from the
pattern number with an ‘‘E’’ and
add $17.
Stretcher Option:
• A stretcher is optional on 24 and
30 deep tables ONLY. To specify
a table without a stretcher replace
the ‘‘S’’ suffix from the pattern
number with an ‘‘N’’.
Stretchers are required on 36
and 42 depths.
334