download - Knoll

Worksurface Specifications
Worksurface Support Options
Dividends Horizon
Panel-Hung Worksurface Support
All worksurfaces require support every 48" in
width. In panel-hung applications, mid-span
support must be provided by cantilevers,
panel-mounted C-legs or open support legs.
When worksurfaces are mounted perpendicular
to panels, the worksurface depth must equal
the width of the panel when using panel-toworksurface
brackets.
Cantilevers are available in three depths
to match worksurface depths.
by 18" deep cantilevers.
by 24" deep cantilevers.
to be supported by cantilevers. 30" deep
cantilevers are used for mid-span support.
supported by cantilevers.
Panel-mounted C-leg supports are available
to support 24" and 30" worksurface depths
in heavier worksurface load applications.
Open support legs are available to support
18", 24" and 30" worksurfaces depths.
Freestanding Worksurface Support
For freestanding desk applications, specify
freestanding pedestals, end units and/or
intermediate support every 48" in width.
by 18" deep pedestals and end units only
either 18" or 24" deep pedestals or end units
either 24" or 30" deep pedestals or end units
by 30" deep pedestals or end units and provide
a 6" front overhang for desk applications.
Maximum Width Between Panel-Hung Worksurface Supports
Maximum Width Between
Freestanding Worksurface Supports