TAGnology_TAGid -125kHz_Protocol.pdf - RFID Webshop
TAGnology_TAGid -125kHz_Protocol.pdf - RFID Webshop
TAGnology_TAGid -125kHz_Protocol.pdf - RFID Webshop
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
February 1999 Rev. 1.2 Communication Reader-Host<br />
3.7.20 HT2_Read_Page<br />
Reads a page (4 bytes) of a selected HITAG 2 transponder.<br />
If no transponder is selected, a NOTAG message will be generated.<br />
This command should be used together with ReadPageInv_LT to compare plain data with the<br />
bit-inverted data to gain maximum data reliability.<br />
C-Function: void HT2_Read_Page (BYTE_T pagenr, char *data);<br />
Header-File: Hitag2.H<br />
Serial protocol:<br />
HOST - READ/WRITE DEVICE<br />
0x03 0x82 pagenr BCC<br />
pagenr:<br />
page number<br />
READ/WRITE DEVICE - HOST<br />
n+2 Status data[0] ....... data[3] BCC<br />
n = 0 if an error occurred (error code in Status).<br />
n = 4 if data were read from a transponder (Status = 0).<br />
Status: 0 ... no error<br />
-1 ... SERIAL ERROR<br />
-3 ... NOTAG<br />
Page 35 (107)<br />
Protokoll HTRM801 V1.2/C