TAGnology_TAGid -125kHz_Protocol.pdf - RFID Webshop
TAGnology_TAGid -125kHz_Protocol.pdf - RFID Webshop
TAGnology_TAGid -125kHz_Protocol.pdf - RFID Webshop
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
February 1999 Rev. 1.2 Communication Reader-Host<br />
3.11.3 Long Range: Anticollision Cycle<br />
In case of several transponders in the reading area of the read/write device the GetSnr command<br />
indicates this by the more byte. To select one of these transponders for following read or write<br />
operations an anticollision cycle must be executed as described in the following flow chart.<br />
Long Range-Anticollision-Cycle<br />
START<br />
HTS_GetSnrReset (0x11, &snr, &more);<br />
while (!RWDEot);<br />
GetSnr<br />
RWD RWDErr<br />
0 < ?<br />
0 ?<br />
yes<br />
interpretation<br />
of errors<br />
no<br />
HTS_GetSnrReset (0x10, &snr,<br />
while (!RWDEot);<br />
Select<br />
RWD RWDErr<br />
0 < ? 0 ?<br />
yes<br />
interpretation<br />
of errors<br />
no<br />
Read or write page x, halt<br />
while (!RWDEot);<br />
Read/Write<br />
no<br />
RWD RWDErr<br />
0 < ? 0 ?<br />
yes<br />
interpretation<br />
of errors<br />
Halt<br />
*) In case you want to access the same tags for several times.<br />
Page 81 (107)<br />
Protokoll HTRM801 V1.2/C