technical manual for sailor compact hf ssb t2130 - Gopher Proxy
technical manual for sailor compact hf ssb t2130 - Gopher Proxy
technical manual for sailor compact hf ssb t2130 - Gopher Proxy
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3 SERVICE T2130<br />
3.7.2 COMPONENTS REPLACED<br />
3.7.2.1 POWER AMPLIFIER (MODULE 1)<br />
After replacing the components, per<strong>for</strong>m adjustment procedure section 3.6.1 POWER AMPLIFIER and<br />
3.6.3 ADJUSTMENT OF DRIVE LEVEL.<br />
3.7.2.2 OUTPUT FILTER (MODULE 2)<br />
After replacing the components in the filter section, no adjustment is necessary.<br />
After replacing components in the directional coupler, per<strong>for</strong>m adjustment procedure section 3.6.2<br />
ADJUSTMENT OF OUTPUT FILTER (MODULE 2) and 3.6.3 ADJUSTMENT OF DRIVE LEVEL.<br />
3.7.2.3 TX-PROCESSOR (MODULE 3)<br />
U11 or U12:<br />
1. Test the replaced EEPROM’s <strong>for</strong> read and write.<br />
Please refer to chapter 3.9 SERVICE PROGRAMMES, SP-24-0.<br />
2. Initialize EEPROM’s from scratch.<br />
Please refer to chapter 3.9 SERVICE PROGRAMMES, SP-24-1.<br />
3. Calibrate the T2130.<br />
Please refer to chapter 3.9 SERVICE PROGRAMMES, SP-25.<br />
U17:<br />
1. Calibrate the T2130. Please refer to chapter 3.9 SERVICE PROGRAMMES, SP-25.<br />
3.7.2.4 POWER SUPPLY (MODULE 4)<br />
No adjustment necessary.<br />
3.7.2.6 CONNECTION BOARD (MODULE 6)<br />
No adjustment necessary.<br />
PAGE 3-24
Change language