technical manual for sailor compact hf ssb t2130 - Gopher Proxy

More documents

Recommendations

Info

3 SERVICE T2130 SP-33 Adjustment of the bias current in the power transistors in the Power Amplifier (1). Example: Operator: Key: 33 RE2100: Displays: ‘SP-33-0’ ‘ SE. ‘ T2130: The transmitter is keyed. There are no RF-signals applied to the Power Amplifier (1). Operator: May now adjust the bias current in accordance with the adjustment procedure. When the adjustment is finished: Operator: Key: RE2100: Displays: ‘SP-33-0’ ‘ A. ‘ 3.9.2 SERVICE PROGRAMMES RELATED TO AT2110 SP-30 Activates AT2110 relays 1-9 one by one, and releases any relay. Example: Operator: Key: 30 - (0-9) RE2100: Displays: ‘SP-30-(0-9)’ ‘ A. ‘ Legend: 0 = No relays activated. 1-9 = Relays 1-9 activated. A. = Accepted. The T2130 activates the entered AT2110 relay no., other relays are released. SP-31 Activates AT2110 relays 10-19 one by one. Example: Operator: Key: 31 - (0-9) RE2100: Displays: ‘SP-31-(0-9)’ ‘ A. ‘ Legend: 0-9 = Relays 10-19 activated. A. = Accepted. The T2130 activates the entered AT2110 relay no., other relays are released. If the AT2110 is in the systen (jumper 5 is inserted in the TX-processor) the following is displayed: RE2100: Displays: ‘SP-25 ‘ ‘ Err.1 ‘ SP-32-0 Resets the AT2110 ‘Clock’ line, ‘Data’ line and the ‘Motor +’ line to their normal state. Example: Operator: Key: 32 - 0 RE2100: Displays: ‘SP-32-0’ ‘ A. ‘ PAGE 3-32 9315
3 SERVICE T2130 SP-32-1 Sets the AT2110 clock line high. Example: Operator: Key: 32 - 1 RE2100: Displays: ‘SP-32-1’ ‘ A. ‘ SP-32-2 Sets the AT2110 data line high. Example: Operator: Key: 32-2 RE2100: Displays: ‘SP-32-2’ ‘ A. ‘ SP-32-3 Sets supply on the AT2110 ‘Motor +’ line, (low speed). Example: Operator: Key: 32 - 3 RE2100: Displays: ‘SP-32-3’ ‘ A. ‘ -- 9315 PAGE 3-33
Page 1:
TECHNICAL MANUAL FOR SAILOR COMPACT
Page 5 and 6:
T2130 CONTENTS 1 GENERAL INFORMATIO
Page 7:
T2130 CONTENTS 1 GENERAL INFORMATIO
Page 10 and 11:
1 GENERAL INFORMATION T2130 1.3 TEC
Page 12 and 13:
1 GENERAL INFORMATION T2130 1.4 PRI
Page 15:
T2130 CONTENTS 2 INSTALLATION MECHA
Page 18 and 19:
2 INSTALLATION MECHANICAL HF SSB TR
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37: 2 INSTALLATION MECHANICAL HF SSB TR
Page 54 and 55: T2130 3.7.1 MODULES REPLACED 3-23 3
Page 56 and 57: 3 SERVICE T2130 3.4 TROUBLE SHOOTIN
Page 58 and 59: 3 SERVICE T2130 If the error has ap
Page 60 and 61: 3 SERVICE T2130 3.4.2 OUTPUT FILTER
Page 62 and 63: 3 SERVICE T2130 3.4.4 POWER SUPPLY
Page 64 and 65: 3 SERVICE T2130 3.4.5 NOT USED 3.4.
Page 66 and 67: 3 SERVICE T2130 3.5.1 POWER AMPLIFI
Page 68 and 69: 3 SERVICE T2130 3.5.3 TX-PROCESSOR
Page 70 and 71: 3 SERVICE T2130 3.5.3.3 RF ON/OFF T
Page 72 and 73: 3 SERVICE T2130 3.5.3.9 TUNE MOTOR
Page 74 and 75: 3 SERVICE T2130 3.5.5 NOT USED 3.5.
Page 76 and 77: 3 SERVICE T2130 IMPORTANT! the inpu
Page 78 and 79: 3 SERVICE T2130 3.7.2 COMPONENTS RE
Page 80 and 81: 3 SERVICE T2130 3.8.12 OUTPUT POWER
Page 82 and 83: 3 SERVICE T2130 SP-22-0 Displays th
Page 84 and 85: 3 SERVICE T2130 Operator: Key: 25 R
Page 89: T2130 CONTENTS 4 MECHANICAL DISASSE
Page 93 and 94: 4 MECHANICAL DISASSEMBLING T2130 4.
Page 95: T2130 CONTENTS 5 CIRCUIT DESCRIPTIO
Page 98 and 99: 5 CIRCUIT DESCRIPTION AND SCHEMATIC
Page 102 and 103: T2130 5 CIRCUIT DESCRIPTION AND SCH
Page 131 and 132: T2130 6 PARTS LIST HF SSB T2130 MF/
Page 133 and 134: 6 PARTSLIST T2130 POSITION DESCRIPT
Page 135 and 136: 6 PARTSLIST T2130 POSITION DESCRIPT
Page 137 and 138:
6 PARTSLIST T2130 POSITION DESCRIPT
show all

technical manual for sailor compact hf ssb t2130 - Gopher Proxy

Create successful ePaper yourself

Delete template?

Save as template?