Sonim Xperience One (XP1) - Sonim Technologies

Push-to-Talk
Make calls from the group list
A group has a set of pre-arranged members and a unique
group ID. A group PTT call is similar to a one-to-many PTT
call.
1. To access the group list select Menu > PTT > Group.
2. Scroll to a group and press the PTT key, Ringing is displayed
on the screen.
3. When any member from the
group responds, the contact
name is displayed with a green
icon beside it. If a member has
not accepted the call a red icon
is displayed beside the contact
name. You can begin speaking
after the beep. Group session,
Start sending, Speaking is displayed
at the top of the
screen. When you are speaking a list of all the participants
in the session is displayed on the screen.
4. Continue to hold the PTT key while you are speaking
and release the key when you finish speaking.
5. If any member takes floor control, Start receiving, Listen
is displayed at the top of the screen.
6. During the session the status of
all the members in the group is
displayed on the screen. The
name of the person speaking is
highlighted in the displayed list
of participants.
7. To add more members to the
group select Add, use the
Menu key to select more members
and select OK. Add user to
session is displayed at the top of the screen.
8. As the initiator, if you press the button , the
group session closes and all members get disconnected
from the session.
9. Press the button to end the call.
Make unplanned group calls
Unplanned or ad hoc groups are created on the spur of the
moment and do not have pre-arranged set of members or a
specified group ID.
1. To make an ad hoc group call, press the PTT key, the
list of Contacts appears.
2. Use the Menu key as a toggle key to select or clear
the checkbox against the contacts you want to call.
3. Press the PTT key to initiate the call Ad-hoc PTT invitation.
Start sending, Speaking is displayed at the top of
the screen.
49