Mbox Pro User Guide v9.0 (PDF) - Digidesign

More documents

Recommendations

Info

12 Mbox Pro User Guide
chapter 4 Making Studio Connections This chapter provides step-by-step instructions for connecting mics, instruments, mixers, headphones, speakers, and other devices to Mbox Pro. Connecting Outputs To hear audio from Mbox Pro, you will need to connect headphones or an external sound system (such as powered monitors or a home stereo) to Mbox Pro. Connecting Headphones You can use headphones equipped with a 1/4- inch stereo jack to monitor your audio. Headphone level (A, B) To connect headphones: 1 Connect headphones with a 1/4-inch stereo connector (or adapter) to the Headphone outputs A or B. 2 Adjust the volume using the corresponding Headphone Volume knob on the front panel. By default, Headphone output A mirrors Monitor output channels 1–2. You can create independent stereo mixes for each headphone output in the Driver Control Panel. See “Stereo Mix Section” on page 34. Do not use the front panel headphone outputs for anything but headphones. If you use a headphone distribution amp or cue system, use any of the six Monitor outputs on the back panel. See “Monitor Outputs 1–6” on page 14. 1/4-inch Headphone outputs (A, B) Headphone jacks and controls on front of Mbox Pro Chapter 4: Making Studio Connections 13
Page 1 and 2: ® Mbox Pro User Guide Version 9.0
Page 3 and 4: contents Chapter 1. Welcome to Mbox
Page 5 and 6: chapter 1 Welcome to Mbox Pro Welco
Page 7 and 8: System Requirements and Compatibili
Page 9 and 10: chapter 2 Mbox Pro Hardware Overvie
Page 11 and 12: Master Volume Knob The Master Volum
Page 13 and 14: +4/-10 Switches These switches let
Page 15: chapter 3 Installing and Connecting
Page 19 and 20: Audio Inputs Mbox Pro provides six
Page 21 and 22: Using a Mic with an XLR Connector (
Page 23 and 24: Connecting Instruments to the Mbox
Page 25 and 26: Connecting Inserts Mbox Pro provide
Page 27 and 28: MIDI Connections Two MIDI ports bec
Page 29 and 30: chapter 5 Using the Driver Control
Page 31 and 32: Hardware Settings This section of t
Page 33 and 34: Pre-Fader Meters When this option i
Page 35 and 36: Output Setup You can configure ster
Page 37 and 38: Flow Clicking the Flow button opens
Page 39 and 40: Hardware Inputs Software Returns Ma
Page 41 and 42: • Control room output pairs must
Page 43 and 44: Swap Button Swaps the stereo image,
Page 45 and 46: Vertical Vertical (Meters Only) The
Page 47 and 48: chapter 6 Using the Multi Button Th
Page 49 and 50: Undo Each time the button is presse
Page 51 and 52: appendix a Using CoreAudio- and ASI
Page 53 and 54: appendix b Compliance Information E
Page 55 and 56: Important Safety Instructions 1) Re
Page 57 and 58: index A Aux inputs connecting 15 ja
Page 59: Avid 2001 Junipero Serra Boulevard

Mbox Pro User Guide v9.0 (PDF) - Digidesign

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?