Mbox Pro User Guide v9.0 (PDF) - Digidesign

Undo Each time the button is pressed and released,
it undoes that last operation you performed
in Pro Tools. (Same as the Undo command
from the Pro Tools menu)
Save Session Each time the Multi button is
pressed and released, it saves the session.
Tap Tempo The Multi button can be tapped to
adjust the session tempo. Tapping tempo will
cause Pro Tools to come out of Conductor mode
and match its tempo to the tapped tempo. If
Pro Tools is already in Manual Tempo mode, the
session will automatically adjust its tempo to
match the value created by the Tap Tempo function.
Press and Hold Options
When you click on the Press and Hold list, a
pop-up menu provides access to the following
options:
Add Last Track Adds the last track type that you
created in the session. Say you have created two
Audio tracks in a session. It will add another
mono Audio track.
Add Selected Track Adds whatever tracks that
you have selected in a session. Say you have selected
two Audio tracks in a session. It will add
another two Audio tracks.
Cursor to Next Marker Each time the button is
held and released, the transport will locate to
the next marker location.
Cursor to Previous Marker Each time the button
is held and released, the transport will locate to
the previous marker location.
Start/Stop Playback Each time the button is
held and released, it starts/stops playing back
the session.
Start/Stop Record Each time the button is held
and released, it starts/stops recording.
Loop Playback Toggle Each time the button is
held and released, the Loop Playback mode is
toggled between enabled and disabled.
Undo Each time the button is held and released,
it undoes that last operation you performed in
Pro Tools. (Same as the Undo command from
the Pro Tools menu)
None No function is selected in this mode.
Save Session Each time the Multi button is held
and released, it saves the session.
Chapter 6: Using the Multi Button 45