Command Reference - Stollmann

More documents

Recommendations

Info

TA+USBA Command Reference 1.01/06.2007 3. TA+Configurator command set ccts CTS control CTS control 0 : CTS follows RTS 1 : HW FLC / hardware flow control RTS/CTS (default) 2 : CTS follows DTR For nearer information see also chapter 3.3. cdcd DCD control DCD control 0 : DCD always ON 1 : DCD indicates a connection (default) 2 : DCD follows DTR For nearer information see also chapter 3.3. cdsr DSR control DSR control 0 : DSR always ON 1 : DSR indicates a connection 2 : DSR follows DTR 3 : DSR follows DCD 5 : DSR Off Hook (default) For nearer information see also chapter 3.3. 48 © Stollmann Entwicklungs- und Vertriebs-GmbH
1.01/06.2007 TA+USBA Command Reference 3. TA+Configurator command set cdtr DTR control Usage of DTR to control ISDN connection 0 : No control: Incoming calls will be accepted independent of DTR status; DTR drop does not disconnect an active connection. 2 : DTR off disconnects (default) Incoming calls will be accepted only when DTR is ON; DTR drop disconnects an active connection. 4 : DTR ignore and DTR drop disconnects Incoming calls will be accepted independent of DTR status; DTR drop disconnects an active connection. For nearer information see also chapter 3.3. chappwd set password for PPP chap authorization (only required for WINDOWS 95) Enable ML-PPP CHAP authorization by setting the password corresponding to the user name used for the PPP connection. If the server does not handle CHAP an automatic fallback to PAP is performed. chappwd= set password for CHAP Note: Since the password is shown in plain text it may be disclosed by unauthorized persons. cmds command set (note 1) Command set for connection control 0: AT command set (default) 1: PAD X.3 command set 10: Configurator (internal configuration command set) Note: For details see the appropriate chapters. After changing cmds via remote management the TA has to be reset using the command "reset". © Stollmann Entwicklungs- und Vertriebs-GmbH 49
Page 1 and 2: TA+USBA Command Reference ISDN Term
Page 3 and 4: 1.01/06.2007 TA+USBA Command Refere
Page 49: 1.01/06.2007 TA+USBA Command Refere

Command Reference - Stollmann

Create successful ePaper yourself

Delete template?

Save as template?