PDF | 8 MB - Australian Building Codes Board

More documents

Recommendations

Info

Australian Building Codes Board Page 1 SPECIFICATION E4.8 PHOTOLUMINESCENT EXIT SIGNS Deemed-to-Satisfy Provisions 1. Scope This Specification contains requirements for photoluminescent exit signs. 2. Application A photoluminescent exit sign must comply with the requirements for externally illuminated exit signs in AS 2293.1, except where varied by this Specification. 3. Illumination A photoluminescent exit sign must— (a) be maintained in a charged state by a minimum illumination of 100 lux at the face of the sign; and (b) be preconditioned by a minimum illumination of 100 lux for a minimum of 60 minutes at the face of the sign, prior to the building being occupied; and (c) in the event of a power failure, continue to provide a minimum luminance of 30 mcd/m 2 for not less than 90 minutes; and (d) have its performance verified by testing in accordance with the method described in ASTM E2073-10, except the activation illumination in clause 8.3 is replaced with 100 lux. 4. Pictorial elements Pictorial elements on a photoluminescent exit sign must— (a) (b) (c) where the colour white is used, be replaced with a photoluminescent material; and be not less than 1.3 times larger than that specified in Table 6.1 of AS 2293.1; and have a border of photoluminescent material that extends not less than 15 mm beyond the pictorial elements. 5. Viewing distance PUBLIC COMMENT DRAFT The maximum viewing distance in clause 6.6 of AS 2293.1 must not be more than 24 m. NCC2014 Volume One Spec E4.8 – 6.
Page 2 Australian Building Codes Board 6. Smoke control systems Deemed-to-Satisfy Provisions Smoke control systems required by clause 6.3 of AS 2293.1 do not apply to a photoluminescent exit sign. PUBLIC COMMENT DRAFT Spec E4.8 – 6. NCC2014 Volume One
Page 1 and 2: Page 2 Australian Building Codes Bo
Page 3 and 4: Australian Building Codes Board Pag
Page 5 and 6: Page 18 Australian Building Codes B
Page 15 and 16: Page 2 (ii) (iii) area of the build
Page 17 and 18: (b) (c) Australian Building Codes B
Page 19 and 20: Page 4 (iv) Australian Building Cod
Page 21 and 22: (b) (ii) Australian Building Codes
Page 23 and 24: E1.4 Fire hose reels (a) (b) (c) (d
Page 29 and 30: (b) Australian Building Codes Board
Page 31: Page 6 Australian Building Codes Bo
Page 67 and 68: Safety measure Australian Building
Page 77 and 78: (e) (f) (g) (iii) (Y) (Z) Australia
Page 81 and 82: Table J2.4a ENERGY INDEX Applicatio
Page 83 and 84:
Page 10 Australian Building Codes B
Page 85 and 86:
Australian Building Codes Board Pag
Page 87 and 88:
Page 2 Australian Building Codes Bo
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Reference Section B B1.4(i)(ii)(C)
Page 99:
Reference FV5.3 Australian Building
show all

PDF | 8 MB - Australian Building Codes Board

Create successful ePaper yourself

Delete template?

Save as template?